Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Chillers and Stir Plates (http://www.homebrewtalk.com/f255/)
-   -   How Fast is Fast? My DIY Immersion Chiller -2 parallel 20'x3/8" coils (http://www.homebrewtalk.com/f255/how-fast-fast-my-diy-immersion-chiller-2-parallel-20x3-8-coils-384021/)

adamreef 01-28-2013 11:55 PM

1 Attachment(s)

So, htc, great minds, right?!?!

I built this a couple of weeks ago. It has 4 x 25' 3/8 copper. I did not want any connections to be inside the kettle, so all of the lines arch over the edge of the pot into a manifold. I very unscientifically used my highly calibrated finger to gauge the effluent temperature and it seemed to be similar across all of the coils. I have been very impressed with it's efficiency. I thought I would post a picture for those who are concerned about having solder joints immersed in wort. That said, I did solder a few places where the tubing crossed to give it a little more stability.

All times are GMT. The time now is 05:53 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.