Happy HolidaySs Giveaway - Winners Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Cleaners (keg, carboy, lines, etc) > DIY "sanitiser keg" with ball lock valve
Reply
 
LinkBack Thread Tools
Old 02-09-2014, 10:17 PM   #11
ClaudiusB
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2007
Location: El Paso, Texas
Posts: 1,288
Liked 64 Times on 54 Posts
Likes Given: 126

Default

Quote:
Originally Posted by eddiewould View Post
Hey guys,

Looking to build a "sanitiser keg" on the cheap.
Any ideas? Or should I just abandon and buy a second keg?
No soda keg is required, any container will do.
I used a 5 gallon plastic container I had floating around with a cheap ebay submersible 12 VDC pump.
I fill the container first with hot PBW, circulate for 30 min, water rinse and sanitize.
The pump can clean only two taps at a time, not enough pressure and flow.
100_3068.jpg   100_3069.jpg   100_3059.jpg   100_3056.jpg   100_3011.jpg  

ClaudiusB is offline
Stealthcruiser Likes This 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brass connectors and ball valve ("in California" Some-Low Lead)... Did I screw up $? LinuxAssailant Equipment/Sanitation 5 01-22-2014 11:43 PM
New York Tri clover parts FS 1/2"-3/4" clamps, 2"MPTx2.5" TC adapter, 2.5" gaskets, & 3" valve WPStrassburg For Sale 0 01-05-2014 05:18 AM
3/8" vs 1/2" hose barb adapter for Mash tun ball valve? Stein Equipment/Sanitation 1 09-14-2012 05:34 AM
Where to buy 1-1/4" or 1-1/2" Stainless Steel Ball Valve sjlammer Equipment/Sanitation 4 01-31-2011 01:59 PM
3/8" Ball Valve to 1/2" Quick disconnect?? Pleepleus Kettles, Mash Tuns, & Hot Liquor Tanks 5 07-01-2010 06:39 PM



Newest Threads

LATEST SPONSOR DEALS