It's dimensions are, 28" tall, 48" long, 12" between tubes on top. Every short cut tube is 12" long, 10 total. I cut all of the metal on a band saw at school, filed the inside ends and then hit them with a flap disk on the angle grinder. I then used simple green cleaner to degrease it before welding. The welder is the 90 amp flux wire welder from harbor freight. If you decide to use it, make sure you buy a roll of Lincoln or miller .035 flux wire, 12 bucks at home Depot. Yeah its 40 feet of 2" mild steel strong as hell!