HBT 2015 Big Giveaway - Enter Now

Huge Supporting Membership Discounts - 20% Off

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > splash proofing walls
Reply
 
LinkBack Thread Tools
Old 02-16-2011, 10:40 PM   #1
red96jeep
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2009
Location: maryland
Posts: 149
Liked 3 Times on 3 Posts

Default splash proofing walls

hey guys, I have my brewing setup in my partially finished garage. I love the ease of use of brewing with a cement floor, but with lots of spills and a hose spraying sometimes it gets pretty water logged on the floor. This has led to a slight issue with mold growing along the bottom of the wall where the drywall and molding meet the cement. This is obviously from water getting under, and sitting under the walls. My Question for you is what can i do to "splash" proof my walls? i want to cut out the old wall board that is moldy, i was thinking i could replace it with standard dry wall and put some sort of water proof cover over the wall such as something made out of the same material as a bath tub, i really have no idea to go about doing this. Any ideas?

__________________
red96jeep is offline
 
Reply With Quote Quick reply to this message
Old 02-16-2011, 11:10 PM   #2
JoeBronco
Feedback Score: 2 reviews
Recipes 
 
Join Date: Jan 2011
Location: East Bay, NoR-CaL
Posts: 825
Liked 13 Times on 12 Posts
Likes Given: 14

Default

Dry Erase board.

Its cheap and they sell it at Home Depot. Its easy to clean up and you can take notes on it.
*Put up the Sheetrock and paint
*Use Liquid nails to hold the board on to the wall and drill in 4 corners
*You can put it up to waist high with a trim to make it functional or floor to ceiling to make it a note-board as well.

Works like a charm and should last YEARS!

__________________

On Deck ______________ Tasty's Brown (Brown with NB)
1st Primary ____________ Sour Pliny
Kegged________________ Sangio.Port Wine
Bottle Ageing __________ Giddy Gremlin, RyIIIPAWhiskey Vanilla Porter (Bottled 4-20)

SILVER - BABO - "Oaked Whiskey Vanilla Porter"
SILVER - Celebrewtion - "Bourbon Vanilla Porter"
GOLD - BABO - "Hoptop"
SILVER - BABO - "Screaming Cream"
Honorable Mention: (x2) Giddy Gremlin RyIIpa (x1) Pliny The Mexican

JoeBronco is offline
 
Reply With Quote Quick reply to this message
Old 02-16-2011, 11:14 PM   #3
rudu81
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: cleveland, ohio
Posts: 242
Default

There is drywall out there, I believe called greenboard that is designed to tolerate more moisture. Also, I would use a wall covering similar to what you might see in a restaurant kitchen or bathroom. I can't think of the name of it, but it is usually sold in 4x8 plastic sheets.

__________________
rudu81 is offline
 
Reply With Quote Quick reply to this message
Old 02-16-2011, 11:56 PM   #4
Begin2Brew
Searching for the perfect beer one at a time
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Begin2Brew's Avatar
Recipes 
 
Join Date: Jan 2011
Location: Antioch, IL
Posts: 741
Liked 59 Times on 56 Posts
Likes Given: 11

Default

You can either use greenboard which is drywall with a special paper on it or cement board which is a cement product. I would go with cement board as it is superior for water repellent.

__________________

Bill

Ruffled Feathers Brewery

Begin2Brew is offline
 
Reply With Quote Quick reply to this message
Old 02-17-2011, 12:13 AM   #5
edkittley
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Largo, FL
Posts: 34
Liked 1 Times on 1 Posts

Default

Cover the area you want to waterproof with FRP (Fiberglass Reinforced Paneling) and caulk the seams, cover with plastic trim, and voila, waterproof wall. That's the way a lot of bars do it. If you want to get away from drywall, you can always use Wonderboard.

__________________
edkittley is offline
 
Reply With Quote Quick reply to this message
Old 02-17-2011, 12:14 AM   #6
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 3 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,467
Liked 1165 Times on 773 Posts
Likes Given: 29

Default

Don't mean to be such a dissenter, but cement board isn't water repellent. Installations using it still require a vapor barrier behind it. Greenboard is also just moisture tolerant but it really shouldn't get wet.

How high up does the mold go? If it's just like a surface coating you can brush some bleach water on there and then run a fan to dry it really well.

They make a thin white plastic wall board for laminating the interior of cold rooms and laundry rooms that would work well in this case. The key is to put a good bead of 100% silicone caulk at the floor joint.

__________________

Welcome to BrewHardware.com. I love you.
New 100% Stainless Steel Heating Elements are IN! ULWD 5500w Ripple, 2000w, 1500w, etc
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

Bobby_M is online now
 
Reply With Quote Quick reply to this message
Old 02-17-2011, 12:17 AM   #7
the_bird
10th-Level Beer Nerd
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
the_bird's Avatar
Recipes 
 
Join Date: May 2006
Location: Adams, MA
Posts: 20,736
Liked 427 Times on 354 Posts
Likes Given: 109

Default

I'm not sure greenboard is really even moisture resistant, really just humidity resistant. The cement board, too, it's good for tiling because it'll stay together even if it gets wet, but it's going to absorb a lot of moisture.

__________________
Come join Yankee Ingenuity!

"I'm kind of toasted. But I looked at my watch and it's only 6:30 so I can't stop drinking yet." - Yooper's Bob
"Brown eye finally recovered after the abuse it endured in Ptown last weekend, but it took almost a full week." - Paulie
"no, he just doesn't speak 'stupid'. i, however, am fluent...." - motobrewer
"... I'll go both ways." - Melana

That'll do, Pigley. That'll do.
the_bird is offline
 
Reply With Quote Quick reply to this message
Old 02-17-2011, 12:32 AM   #8
PleasantValleyHops
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: frederick, md
Posts: 364
Liked 24 Times on 21 Posts

Default

Quote:
Originally Posted by edkittley
Cover the area you want to waterproof with FRP (Fiberglass Reinforced Paneling) and caulk the seams, cover with plastic trim, and voila, waterproof wall. That's the way a lot of bars do it. If you want to get away from drywall, you can always use Wonderboard.
This is exactly what u want. Frp is great and u can get it at homedepot or lowes. U have to get all Componets with it amd use the correct glue right over drywall. Green board or purple(moisture,mold,mildew) resistance ive installed in dishrooms for restuarants caulk at the flr. Good luck with ur project. Frp by the way is 15$ a sheet 4x8 the glue is where is gets a little more money.
__________________
Carroll Brewing CompanyFrederick, Md.
PleasantValleyHops is offline
 
Reply With Quote Quick reply to this message
Old 02-17-2011, 12:41 AM   #9
Clann
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Edmonton Ky
Posts: 1,334
Liked 16 Times on 16 Posts
Likes Given: 51

Default

If I was going to do it on the cheap, I would paint the walls and baseboard with gloss latex paint and then caulk the baseboard

__________________
Clann is offline
 
Reply With Quote Quick reply to this message
Old 02-17-2011, 01:07 AM   #10
camus
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: flatland
Posts: 217
Likes Given: 1

Default

+1 on the cement board, I really wouldn't call it a water repellent though.

You still don't want to get it wet. If it were me, I would put some cheap tile on it. You could go the route of FRP or sheet vinyl, just run that to the floor. Keep the the cement board or whatever you decide off the floor at least 1/2". If you go with FRP you could either run a rubber base or use a vinyl molding. Either way use silicone caulk behind it before installing and run bead along the gap at the floor.

__________________
camus is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cooler MLT: leaking inside cooler walls edasaurus Kettles, Mash Tuns, & Hot Liquor Tanks 3 02-04-2011 07:25 AM
Need Idea to form Splash Guard for pumps Mirilis Other 6 12-16-2009 04:31 PM
DIY Back Splash phillc Other 9 07-29-2009 10:32 PM
vinyl shower walls eriktlupus Other 9 08-09-2008 01:40 AM



Newest Threads

LATEST SPONSOR DEALS