Happy HolidaySs Giveaway - Winners Re-Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Rust on my Heating Element
Reply
 
LinkBack Thread Tools
Old 10-09-2009, 02:39 AM   #1
BuckyBrewing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Posts: 25
Default Rust on my Heating Element

OK I was going to start working on my 2nd electric kettle and took apart the first one so I can take some measurements of the cable lengths then I noticed something. My water heater element rusted when I only ran it 2 times. I am thinking that I may have to get another one. Here is a picture of the rust. I was wondering if anyone else had this problem and if so how did you address it?



Thanks,
Dennis

__________________
BuckyBrewing is offline
 
Reply With Quote Quick reply to this message
Old 10-09-2009, 03:10 AM   #3
scoots
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2008
Posts: 109
Likes Given: 1

Default

I have seen this on my element. It happened when I had a very small leak. I cleaned it up with barkeepers friend and I know make sure I wipe the element down after using it. The very small leak is now fixed as well.

__________________
scoots is offline
 
Reply With Quote Quick reply to this message
Old 10-09-2009, 03:17 AM   #4
BuckyBrewing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Posts: 25
Default

wilserbrewer it is not wort residue. i was just boiling water to make sure it was working properly. Now I am a little tentative on using this element bcs of the rust.

I will try to use the barkeeper's friend to see if it will help with the rust. I guess I will be extra careful with any water/wort that maybe left on the element itself.

__________________
BuckyBrewing is offline
 
Reply With Quote Quick reply to this message
Old 10-09-2009, 04:44 PM   #5
leosastronomy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: Wisconsin
Posts: 2
Default

I have the same thing happening. I left water in by electric kettle for a few days (test run, it has not been used with wort yet) and there is a rust stain running down from the element inside the kettle. I wonder if this is happening because we aren't using a sacrificial anode like you would find inside a water heater. I'm sure BKF will clean it up, perhaps I need to blow the moisture off the element with compressed air when I am done using it.

__________________
leosastronomy is offline
 
Reply With Quote Quick reply to this message
Old 10-09-2009, 05:03 PM   #6
rj_hockey
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2007
Location: Toledo, OH
Posts: 81
Default

I have a small amout of rust on my SS nut, in my HLT. I just cleaned it off with a choreboy. I didn't notice it right away I'm sure since I don't pull apart my HTL that often all the water I use is pumped in. So I have probably brewed a few batches with it and tastes fine to me.

__________________

Primary: Pumpkin Pie
Secondary: Woods Pail Cider
Secondary: 50/50
On Tap: Woods Pale Ale, Double Citrus IPA, Blitzen Ale

rj_hockey is offline
 
Reply With Quote Quick reply to this message
Old 10-10-2009, 02:16 PM   #7
walther
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2008
Posts: 143
Default

I asked the same question once (maybe you can find it).
Anyway, mine often looks like that if you do not dry it completely off after cleaning. No problem, mine always look fine after another brew.

__________________
walther is offline
 
Reply With Quote Quick reply to this message
Old 10-11-2009, 04:15 PM   #8
paledragon
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2008
Location: Bridgewater, MA
Posts: 156
Default

i bought an aluminum anode at home depot and put it in the HLT and boil kettle as needed. i'm not completely sure, but i think it needs to be in contact with the metal it's supposed to protect as well.

p.d.

__________________

keg 1: 3 hearted ale
keg 2: british strong ale
keg 3: munich helles
keg 4: empty

on deck: more IPA.

paledragon is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
electric heating element Brewpastor Brew Stands 9 01-01-2012 10:20 PM
WTF... problems with rust in SS kegs around welds and HW heater element help! flananuts Kettles, Mash Tuns, & Hot Liquor Tanks 5 01-31-2010 01:31 PM
Induction heating element Gregredic Equipment/Sanitation 42 09-14-2009 10:29 PM
No + / - on heating element RockfordWhite Other 11 10-04-2008 05:33 PM
Rust on heating element, is it OK? [picture] walther Equipment/Sanitation 2 06-02-2008 09:39 PM



Newest Threads

LATEST SPONSOR DEALS