Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Brew Stands (http://www.homebrewtalk.com/f253/)
-   -   Rims MLT build (http://www.homebrewtalk.com/f253/rims-mlt-build-305319/)

Jbt 04-01-2012 03:25 PM

1 Attachment(s)

Finishing up the cart.. Just realized i should have got locking casters. Its going to roll around while stiring. Starting on a new rims tube now.


Jbt 04-02-2012 12:11 AM

1 Attachment(s)

Just finished the rims tube


Jbt 04-02-2012 09:28 AM

3 Attachment(s)

I fab it from raw material. 1 1/2 tubing, 2- 3/8 half couplings, a 1/4 half coupling for the temp sensor, and I machined a end cap with 1in Npsm threads in it for the heater. The conduit box I made with sheet metal end caps and piece of 3in tube. All 304 stainless, tig welded and electro polished.

I'm thinking I may remake it thou because I think i may put a tri-clamp on the end. Then thread a cap to put the heater in so it can be removed easy, to clean the element.


Jbt 04-02-2012 09:28 AM

3 Attachment(s)

I fab it from raw material. 1 1/2 tubing, 2- 3/8 half couplings, a 1/4 half coupling for the temp sensor, and I machined a end cap with 1in Npsm threads in it for the heater. The conduit box I made with sheet metal end caps and piece of 3in tube. All 304 stainless, tig welded and electro polished.

I'm thinking I may remake it thou because I think i may put a tri-clamp on the end. Then thread a cap to put the heater in so it can be removed easy, to clean the element.


Jbt 04-02-2012 09:28 AM

3 Attachment(s)

I fab it from raw material. 1 1/2 tubing, 2- 3/8 half couplings, a 1/4 half coupling for the temp sensor, and I machined a end cap with 1in Npsm threads in it for the heater. The conduit box I made with sheet metal end caps and piece of 3in tube. All 304 stainless, tig welded and electro polished.

I'm thinking I may remake it thou because I think i may put a tri-clamp on the end. Then thread a cap to put the heater in so it can be removed easy, to clean the element.


Jbt 04-02-2012 09:22 PM

2 Attachment(s)

Got it somewhat plumbed with some stuff I had laying around from my old setup. I have some alignment issues. I have stainless fittings coming in tomorrow hopefully some will be resolved. I also have to index the temp sensor fitting to the back.


Jbt 04-02-2012 09:22 PM

2 Attachment(s)

Got it somewhat plumbed with some stuff I had laying around from my old setup. I have some alignment issues. I have stainless fittings coming in tomorrow hopefully some will be resolved. I also have to index the temp sensor fitting to the back.


Jbt 04-22-2012 02:41 PM

4 Attachment(s)

Just finished up the ekeggle. Would like to put a level sight glass on it yet. Going to build a stand first.


Jbt 04-22-2012 02:41 PM

4 Attachment(s)

Just finished up the ekeggle. Would like to put a level sight glass on it yet. Going to build a stand first.


Jbt 04-22-2012 02:41 PM

4 Attachment(s)

Just finished up the ekeggle. Would like to put a level sight glass on it yet. Going to build a stand first.



All times are GMT. The time now is 11:42 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.