Happy HolidaySs Giveaway - Winners Re-Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Pneumatic Linear Actuators
Reply
 
LinkBack Thread Tools
Old 09-19-2012, 02:22 PM   #1
CoalCracker
Senior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
CoalCracker's Avatar
Recipes 
 
Join Date: Sep 2009
Location: Macungie, Pa
Posts: 1,595
Liked 100 Times on 63 Posts
Likes Given: 35

Default Pneumatic Linear Actuators

I currently have 1bbl going. Looking to use an actuator to dump my mash. Any one know a good / budget compressor? I'll need an actuator that can lift about 250lbs. Looking at a .5 - 1 gallon tank as well. Found one here. http://www.surpluscenter.com/item.as...86&catname=air

__________________

coalcrackerbrewing.blogspot.com
Vintage Kegerator Build
1 BBL Tippy Dump

CoalCracker is offline
 
Reply With Quote Quick reply to this message
Old 09-19-2012, 05:42 PM   #2
lincoln
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
lincoln's Avatar
Recipes 
 
Join Date: Dec 2009
Location: san jose, ca
Posts: 205
Liked 4 Times on 4 Posts
Likes Given: 1

Default

hate to bust your bubble (so to speak) but " ..other low pressure applications.." this will mean that you will need a huge diameter air cylinder. take a look at : http://www.mcmaster.com/#standard-air-cylinders/=jd0qla,

a 2 " cylinder can get you over 250 lbs but thats at 100 psi. Do you keg at all? you could use co2 and a pressure regulator.

what is the mechanism to dump the tun? is it possible to use a gas spring to help with the load?

__________________
Quote:
Originally Posted by Atonk View Post
... beer perv i guess that's me
lincoln is offline
 
Reply With Quote Quick reply to this message
Old 09-19-2012, 05:55 PM   #3
porcupine73
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2012
Location: Fort Meade
Posts: 811
Liked 47 Times on 43 Posts
Likes Given: 513

Default

Right that pump only puts out 23psig it looks like? Normally compressed air cylinders/actuators run somewhere between 80-120psig.

I would say you need a good hand valve to throttle flow to the actuator. If it's connected to an air supply that is suddenly turned on, actuators tend to be very jerky and make sudden movements. Maybe something like a winch would be better in this application?

To use a compressed gas cylinder to operate an actuator requires a very very important safety tip. There must be a pressure relief installed in the line going to the actuator, it must be rated at less than the actuator maximum working pressure, AND it must be sized (cv) to handle the maximum flow through the line. Otherwise it cannot be done safely. Actuators and valves can and have literally exploded killing people when they were overpressurized from a cylinder. I.e. the maximum pressure on the actuator being maybe 200psig connected to a cylinder with 2600psig pressure can make baaddd things happen.

__________________
porcupine73 is offline
 
Reply With Quote Quick reply to this message
Old 09-19-2012, 06:08 PM   #4
CoalCracker
Senior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
CoalCracker's Avatar
Recipes 
 
Join Date: Sep 2009
Location: Macungie, Pa
Posts: 1,595
Liked 100 Times on 63 Posts
Likes Given: 35

Default

Might have to forgo this idea. Didn't realize there was so much to it..

I have a stand that looks similar to the MoreBeer stand. However my design has a pivot point 2 inches in from the edge. so it will tip like this \__

__________________

coalcrackerbrewing.blogspot.com
Vintage Kegerator Build
1 BBL Tippy Dump

CoalCracker is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pneumatic Bottle Capper - Just...because. -TH- Other 157 11-25-2014 08:20 PM
Electric ball valve actuators TheFlyingBeer Brew Stands 40 06-12-2013 08:23 PM
Coffin Keezer w/ Linear Actuator zlwags85 Kegerators and Keezers 13 05-15-2012 02:07 PM
Pneumatic Keezer DarthBeer Kegerators and Keezers 14 04-02-2010 12:52 AM
Pneumatic Capper ol' rummie Other 24 03-12-2010 01:00 PM



Newest Threads

LATEST SPONSOR DEALS