Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > My Weldless Build Using Strut
Reply
 
LinkBack Thread Tools
Old 10-24-2012, 10:41 PM   #11
FTG-05
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Madison, Al
Posts: 190
Liked 17 Times on 13 Posts
Likes Given: 19

Default

Does Lowes/HD have the nuts (springless) and corner fittings also? I've never seen them - 'course I've never looked for them either. But now I"m interested.

Thanks,

__________________
FTG-05 is offline
 
Reply With Quote Quick reply to this message
Old 10-24-2012, 11:41 PM   #12
limulus
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
limulus's Avatar
Recipes 
 
Join Date: Oct 2009
Location: ATL Burbs, Georgia
Posts: 1,171
Liked 58 Times on 50 Posts
Likes Given: 81

Default

Quote:
Originally Posted by FTG-05 View Post
Does Lowes/HD have the nuts (springless) and corner fittings also? I've never seen them - 'course I've never looked for them either. But now I"m interested.

Thanks,
My local HD has connectors right next to the strut. They don't have every type, but I have seen the basics.
__________________


"Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut."
-Ernest Hemingway
limulus is offline
 
Reply With Quote Quick reply to this message
Old 10-25-2012, 12:14 AM   #13
Rbeckett
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Rbeckett's Avatar
Recipes 
 
Join Date: Dec 2011
Location: Bronson, Fl
Posts: 987
Liked 66 Times on 47 Posts
Likes Given: 29

Default

I like it!!! I built a three tier out of the 14 Ga preslotted and ended up having to alter the design to strengthen the top tier and improve safety. Since I am in a wheelchair I cannot get out of the way if I dump something, so safety is super important and I just wasn't comfortable with an unsupported top tier. So I had to add 2 more uprights and change the over all look of my rig completely. If I do it again, I will use the strut for my next projest, and transfer my controller and plumbing to it from the three tier I have now.
Wheelchair Bob

__________________

What do you mean "no Kidneys"???, WTF now I gotta drink less beer...
Join the Automation sub forum in Electric brewing for a discussion of components and control systems. I did!!!!

Rbeckett is offline
 
Reply With Quote Quick reply to this message
Old 10-25-2012, 07:13 AM   #14
LuiInIdaho
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
LuiInIdaho's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Ponderay, Idaho
Posts: 440
Liked 27 Times on 22 Posts
Likes Given: 24

Default Bill of Materials

Thanks for posting your bill of materials. This made it really easy to find the items needed and to place an order for them. I placed the order tonight.

Thanks for your help.

Mark

__________________
LuiInIdaho is offline
 
Reply With Quote Quick reply to this message
Old 10-25-2012, 01:19 PM   #15
gifty74
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Lancaster, PA
Posts: 264
Liked 27 Times on 10 Posts
Likes Given: 6

Default

Quote:
Originally Posted by LuiInIdaho View Post
Thanks for posting your bill of materials. This made it really easy to find the items needed and to place an order for them. I placed the order tonight.

Thanks for your help.

Mark
No problem. You're going to love how sturdy the thing is when you're done. I started mounting my gas rail last night. They make a nice hose clamp that locks into the strut. You can then slide it to wherever you need it, and it clamps down super tight. I should have the burners mounted and plumbed after tonight. Then I'll just put a branch of strut off the side, mount the controller, wire up the pump, and should be good for the initial trial brew session.

Another helpful tidbit, the March 809 pump is about 3.3" in diameter. I got the 3" pipe clamp and it is just a bit too big to really clamp down and secure the pump in a vertical position. I'm going to swap it out for the 2.5" clamp and try that tonight.
__________________
gifty74 is offline
 
Reply With Quote Quick reply to this message
Old 10-25-2012, 03:28 PM   #16
fork
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2008
Posts: 121
Liked 8 Times on 7 Posts
Likes Given: 2

Default

Looks excellent I'd like to see a picture of the pump mounted with the pipe clamp once you do that.

__________________
fork is offline
 
Reply With Quote Quick reply to this message
Old 10-25-2012, 04:35 PM   #17
rekoob
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
rekoob's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Norfolk, VA
Posts: 1,165
Liked 72 Times on 61 Posts
Likes Given: 6

Default

Nice, looking good.

__________________
rekoob is online now
 
Reply With Quote Quick reply to this message
Old 10-26-2012, 09:34 PM   #18
gifty74
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2009
Location: Lancaster, PA
Posts: 264
Liked 27 Times on 10 Posts
Likes Given: 6

Default

Got the gas manifold plumbed up. I know, it doesn't look very well secured but the two 1/2" hose clamps that clamp down the iron pipe hold is surprisingly tight. I still want to get some vertical support on those burners, but for now it'll work. Also, not sure I like the 3" hose clamp to hold the March pump. That'll also work for now, but will probably look for a more fixed mount here soon. Seems pretty naked still. Will need to get some guarding and my controller mounted.

image-932962980.jpg   image-3110854013.jpg   image-3442929199.jpg   image-780309214.jpg  
__________________
gifty74 is offline
 
Reply With Quote Quick reply to this message
Old 10-26-2012, 10:36 PM   #19
naiek
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
naiek's Avatar
Recipes 
 
Join Date: Feb 2012
Location: Grass Valley, CA
Posts: 2,551
Liked 708 Times on 691 Posts
Likes Given: 27

Default

Picked up the struts today and ordered the hardware from GP

__________________
naiek is offline
 
Reply With Quote Quick reply to this message
Old 10-26-2012, 10:43 PM   #20
FTG-05
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Madison, Al
Posts: 190
Liked 17 Times on 13 Posts
Likes Given: 19

Default

Quote:
Originally Posted by gifty74 View Post
Got the gas manifold plumbed up. I know, it doesn't look very well secured but the two 1/2" hose clamps that clamp down the iron pipe hold is surprisingly tight. I still want to get some vertical support on those burners, but for now it'll work. Also, not sure I like the 3" hose clamp to hold the March pump. That'll also work for now, but will probably look for a more fixed mount here soon. Seems pretty naked still. Will need to get some guarding and my controller mounted.
That looks solid as heck! Why are the burners so low though? Shouldn't they just below the keggle level?

Thanks,
__________________
FTG-05 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Weldless Shelving Single Tier Brew Stand + Fermentation Rack build Zamial Brew Stands 14 02-12-2014 02:22 PM
Need Weldless Bulkhead Kit for Keggle Build JMSetzler Kettles, Mash Tuns, & Hot Liquor Tanks 5 05-11-2012 12:52 AM
Single tier weldless brewstand build tulsabrewdaddy Brew Stands 35 01-31-2012 03:31 PM
***Weldless Bottle Caper Build*** JewBrew Other 12 05-26-2010 03:16 PM
My Weldless Electric HERMS build jcdillin Brew Stands 94 12-04-2009 02:11 AM



Newest Threads

LATEST SPONSOR DEALS