Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Brew Stands (http://www.homebrewtalk.com/f253/)
-   -   My single tier build (http://www.homebrewtalk.com/f253/my-single-tier-build-289260/)

sea1961 01-07-2012 10:26 PM

1 Attachment(s)

Sweet!
Question:
Are you planing to put an air gap between the frame and your Pots, Kettles or Kegs?

Sorry the photo is sideways....


wncbrewer 05-24-2012 12:15 PM

1 Attachment(s)

I bent them around a twelve inch bucket, also my sheet metal was salvaged from the scrap pile at work and had already been bent, so I had to start by hammering it flat again. If I ever do this again, I will certainly take the time to make the jig. Here is a pic if you want to see your influence


tw0st3p 08-26-2012 05:41 PM

1 Attachment(s)

Thought I would give you an update and show you my clone of your single tier. It's getting close, I just need to plumb up the burners. Eventually I will automate the MT and HLT but I want to get a few batches in manually first. Still need to get the pumps and finish up my keggles.

Attachment 73280


ColoHox 12-23-2012 06:05 PM

2 Attachment(s)

I am about 90% done with a clone of your stand. Thank you so much for your detailed diagrams and feedback on this thread.

I printed the diagrams and cut list, ordered steel, and 6 hours later...this:


ColoHox 12-23-2012 06:05 PM

2 Attachment(s)

I am about 90% done with a clone of your stand. Thank you so much for your detailed diagrams and feedback on this thread.

I printed the diagrams and cut list, ordered steel, and 6 hours later...this:


Komocabo 12-25-2012 08:05 PM

6 Attachment(s)

Well done! I finished mine a few weeks ago. I also learned how to weld by doing it so that was awesome. I love my single tier... pumps are up next now that Christmas is all done heres a few pics and one from my brew this past weekend


Komocabo 12-25-2012 08:05 PM

6 Attachment(s)

Well done! I finished mine a few weeks ago. I also learned how to weld by doing it so that was awesome. I love my single tier... pumps are up next now that Christmas is all done heres a few pics and one from my brew this past weekend


Komocabo 12-25-2012 08:05 PM

6 Attachment(s)

Well done! I finished mine a few weeks ago. I also learned how to weld by doing it so that was awesome. I love my single tier... pumps are up next now that Christmas is all done heres a few pics and one from my brew this past weekend


Komocabo 12-25-2012 08:05 PM

6 Attachment(s)

Well done! I finished mine a few weeks ago. I also learned how to weld by doing it so that was awesome. I love my single tier... pumps are up next now that Christmas is all done heres a few pics and one from my brew this past weekend


Komocabo 12-25-2012 08:05 PM

6 Attachment(s)

Well done! I finished mine a few weeks ago. I also learned how to weld by doing it so that was awesome. I love my single tier... pumps are up next now that Christmas is all done heres a few pics and one from my brew this past weekend



All times are GMT. The time now is 05:48 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.