Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > My new brew system, a brutus 10 with some nice modifications
Reply
 
LinkBack Thread Tools
Old 10-21-2012, 06:27 PM   #371
midnightbrewing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Boise, ID
Posts: 33
Liked 3 Times on 2 Posts
Likes Given: 3

Default

This is from the VR8200/4200 manual:

POWER UNIT:
Hold-in current: 300 mA maximum.
Drop-out current: 250 to 90 mA.

__________________
midnightbrewing is offline
 
Reply With Quote Quick reply to this message
Old 10-23-2012, 01:49 AM   #372
Commonwealth
Feedback Score: 1 reviews
Recipes 
 
Join Date: May 2010
Location: Montpelier, VT
Posts: 82
Liked 1 Times on 1 Posts

Default

If your valves are 24v and they draw .5 amp as the pex supply listing shows for them that means you only need 12vA for each, i read somewhere on the forums here thatnyou should add a buffer for safety like 10 or 20%. All that said you should be okay, the vA shouldnt be your problem unless you are running other stuff off of it. Are you sure all you have on your 24v circuit is your gas valves? Also the transformer i bought can be wired three different ways to create different voltages. It can be a 6v ro a 12v or a 24v depending on how you connect it. What transformer did you endup with?

__________________
Commonwealth is offline
 
Reply With Quote Quick reply to this message
Old 10-23-2012, 01:52 AM   #373
Commonwealth
Feedback Score: 1 reviews
Recipes 
 
Join Date: May 2010
Location: Montpelier, VT
Posts: 82
Liked 1 Times on 1 Posts

Default

Ps my dad kept most of those genes too. He is a phd, i found a Local HS physics teacher/neighbor and A LOT of forum searching to figure out wiring my system!

__________________
Commonwealth is offline
 
Reply With Quote Quick reply to this message
Old 10-23-2012, 08:29 PM   #374
midnightbrewing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Boise, ID
Posts: 33
Liked 3 Times on 2 Posts
Likes Given: 3

Default

Figured out my problem. For whatever reason, the LED lights were eating the voltage and not passing enough along to trigger the gas valves.

I have DPDT switches, so I just wired the lights to the second pole and now my burners fire just fine!

Still can't figure why I was getting the correct voltage on the meter with the bare wire, but not when connected to the valve - but with those lights wired in separately, everything's fine!

__________________
midnightbrewing is offline
 
Reply With Quote Quick reply to this message
Old 10-23-2012, 11:39 PM   #375
ShaKeyJ
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2012
Posts: 32
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Quote:
Originally Posted by midnightbrewing
I'm still stuck after switching out the NG spring to LP on the honeywell VR8200.
should there be an audible click when sending the right voltage to the valve? When I test my bare wire leads, I get 28vac, which is the right voltage, but when I test the voltage across the TH/TR on the unit, I get only 2.7vac on the meter.

usually I have a better nose for this kind of stuff, but I'm so very confused right now.
When you test for voltage, the wires should be connected to valve and hold tester one on each at same time. If you got 2.7 when the burner had call to be on then something isn't sending power to valve.
__________________
ShaKeyJ is offline
 
Reply With Quote Quick reply to this message
Old 10-28-2012, 05:42 AM   #376
midnightbrewing
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Boise, ID
Posts: 33
Liked 3 Times on 2 Posts
Likes Given: 3

Default Thanks

my build is complete. first brew is 9 days away! pics/write-up here:

http://www.homebrewtalk.com/f51/its-brutus-10-a-363645/

Thanks for answering all my questions.

__________________
midnightbrewing is offline
 
Reply With Quote Quick reply to this message
Old 02-26-2013, 11:01 PM   #377
OregonBrews
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Oregon
Posts: 11
Liked 1 Times on 1 Posts

Default

After scrutinizing this thread for many hours, I came to a revelation that cleared up so many things for me. Radio Shack 8-position jumper. Bump for my dumb ass figuring something out finally.

__________________
OregonBrews is offline
 
Reply With Quote Quick reply to this message
Old 02-26-2013, 11:45 PM   #378
Huaco
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Huaco's Avatar
Recipes 
 
Join Date: Dec 2011
Location: Just south of Cow Town, Tx
Posts: 1,234
Liked 111 Times on 69 Posts
Likes Given: 34

Default

Quote:
Originally Posted by OregonBrews View Post
After scrutinizing this thread for many hours, I came to a revelation that cleared up so many things for me. Radio Shack 8-position jumper. Bump for my dumb ass figuring something out finally.
Like the ones pictured in my control panel. Upper right corner of the back plate.
DONT FORGET the jumpers too. (unless you like making a bunch of little jumper wires!) lol...

Huaco is offline
 
Reply With Quote Quick reply to this message
Old 08-09-2013, 02:54 AM   #379
Erbe
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2013
Posts: 31
Liked 1 Times on 1 Posts
Likes Given: 2

Default

So when can I place an order for mine?

__________________
Erbe is offline
 
Reply With Quote Quick reply to this message
Old 08-15-2013, 12:36 AM   #380
JacquesG
Frenchy Le Brew
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2013
Location: Encinitas, CA
Posts: 25
Likes Given: 1

Default

Hi, j Awesome build project. I'm doing one, too but not quite so fancy. Although your design has given me pause to reconsider and maybe add the storage component to the build. I love that. What casters did you use and how did you affix them? Thx

__________________
JacquesG is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
The complete cleaning regimen of a brutus system sourmash Equipment/Sanitation 48 05-22-2012 05:08 PM
Brutus 10 type system help JSomps6 Equipment/Sanitation 9 08-25-2009 07:58 PM
Burner gas modulation on brutus system? sourmash Brew Stands 6 03-12-2009 01:16 PM
New guy using Brew House kit with modifications ajk170 Extract Brewing 6 10-07-2008 11:35 AM
Brutus Ten gas system pluto Brew Stands 8 03-08-2008 03:41 PM



Newest Threads

LATEST SPONSOR DEALS