Happy HolidaySs Giveaway - Winners Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!

Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Gravity Fed AG system using hoist?
LinkBack Thread Tools
Old 03-27-2011, 06:13 PM   #1
Feedback Score: 0 reviews
Join Date: Jan 2011
Location: Fort Collins, Colorado
Posts: 4
Default Gravity Fed AG system using hoist?

Hi everyone,

I just finished converting my kegs and am pondering the 3 tier setup. 1 1/4" square metal is about $1.20 per ft here and I'm going to need at least 40 ft. 4x4 studs are not much cheaper AND I only have 2 burners at the moment.

Here is my idea; I can use cinder blocks to support the HLT, build a frame & attach a hoist to raise the MT a couple feet then move a burner under the boil kettle. Sparge in this setup and then raise the boil kettle when I want to run through the CFC to the carboys.

I was thinking an old swing set frame or something would be great but can't find one around here.

I figure I can get away with 2x4's for the frame and a hoist can be had for about $30.

I would appreciate any input/other ideas about this method.

Pkendzi is offline
Reply With Quote Quick reply to this message
Old 03-28-2011, 02:08 AM   #2
/bɪər nərd/
Feedback Score: 1 reviews
MalFet's Avatar
Join Date: May 2010
Location: NYC / Kathmandu
Posts: 8,277
Liked 1270 Times on 845 Posts
Likes Given: 584


To save $50 on struts you want to suspend 60-70 pounds of boiling liquid using ropes? Between the $30 for the hoist, the cash for the 2x4s, and miscellaneous connections, it doesn't sound like you'll save much if anything. Plus, let's not forget the swinging cauldron of molten beer. I love bootleg solutions as much as the next guy, but this sounds to me like a lot more trouble than it's worth. That said, don't let me stop you.

MalFet is offline
Reply With Quote Quick reply to this message
Old 03-28-2011, 02:11 AM   #3
Feedback Score: 1 reviews
Golddiggie's Avatar
Join Date: Dec 2010
Location: Between here and there, and everywhere
Posts: 12,058
Liked 480 Times on 421 Posts
Likes Given: 266


Why not go high tech and get actuators to raise/lower sections?? It probably won't be cheap, but it would have the cool factor to it.

Hopping Tango Brewery

跟猴子比丟屎 ・ Gun HOE-tze bee DIO-se

On Tap: Caramel Ale, Mocha Porter II, MO SMaSH IPA
Waiting/Carbonating: 12.5% Wee Honey II, 8.9% Old Ale, English Brown Ale, Lickah ESB, Mocha Porter II
K2: Epic mead
K3: TripSix
On Deck: Caramel Ale
Mead [bottled]:Oaked Wildflower Traditional, Mocha Madness, Blackberry Melomel, maple wine
Golddiggie is offline
Reply With Quote Quick reply to this message

Quick Reply
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Will a HERMS system work on 1-2 BBL system Ranger9913 Brew Stands 4 01-27-2011 09:08 PM
need ideas for propane connections for 3 tier gravity system Yabo72 Brew Stands 5 09-20-2010 03:52 PM
CBGB's - Countertop Brutus Gravity Fed Brewing System JetSmooth Brew Stands 9 02-19-2010 09:18 PM
My 2-Tier Gravity System Ice9 Brew Stands 23 04-20-2009 02:54 PM
new system is getting better missing link Brew Stands 0 05-05-2008 01:53 AM

Newest Threads