My in-laws have been in town so I spent more time drinking beer than working on my rig.
I finally got the burner brackets welded on. They have one adjustment hole that can move the burners down one inch. The top hole is set to have the burners at 4.5" below the top rail. I may need to add another once I get them fired up.
Today I took the grinder to all the welds and sanded the whole thing down. I went to Autozone and picked up some manifold paint that is good up to 2000 degrees. I decided on flat black to give it an industrial look and figured it would hide some of my crappy welds.
I went to the scrap yard and picked up four brand new swivel wheels with two of the locking for only $12 bucks. Awesome score! I put a nut on the top and bottom so I can adjust the height to compensate for the slight pitch of my driveway.
Here it is with the burners mounted. It looks pretty cool in the flat black.
Hopefully I will get the gas lines plumbed this week. I could still use some suggestions on how and where I should mount the Honeywell ignition modules.
Comments and suggestions would be greatly appreciated.