Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > designing my tippy dump
Reply
 
LinkBack Thread Tools
Old 05-30-2008, 03:37 AM   #1
Jim Karr
Feedback Score: 0 reviews
 
Jim Karr's Avatar
Recipes 
 
Join Date: Dec 2005
Location: SW Michigan..Bangor/Covert area
Posts: 1,275
Liked 5 Times on 4 Posts

Default designing my tippy dump

I've got a second full-size keg that I intend to use as a MLT. I want to engineer it so I can dump out the spent grains, without standing on my head with a small scoop.

If I want to make it so it will tip and dump, do I place my pivot points at exactly half way up its height, or slightly below (to make it tip easier), or slightly above (to make it more stable)?

__________________

As for me and my household, we shall serve the Lord. Joshua




"God is great, beer is good, people are crazy." Some country artist

Jim Karr is offline
 
Reply With Quote Quick reply to this message
Old 05-30-2008, 03:39 AM   #2
Arneba28
Feedback Score: 0 reviews
 
Arneba28's Avatar
Recipes 
 
Join Date: Feb 2008
Location: Amherst, Western New York
Posts: 2,228
Liked 15 Times on 10 Posts
Likes Given: 6

Default

I would go with above midpoint. You dont want to accidentaly hit it while your mashing and dump it.

__________________
My Kegerator Project
Arneba28 is offline
 
Reply With Quote Quick reply to this message
Old 05-30-2008, 03:55 AM   #3
bradsul
Flyfisherman/brewer
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
bradsul's Avatar
Recipes 
 
Join Date: Sep 2006
Location: Ontario, Canada
Posts: 4,908
Liked 23 Times on 21 Posts
Likes Given: 4

Default

I would go above midpoint too. There is a picture on here somewhere of Brewpastor's when his tippy-dump went at the wrong time. Makes me sad just too think about it.

Edit: Found the thread. The picture is smaller than I remember.

__________________
Brad
Canadian Brewers Unite!


Projects: Sylvania Kegerator Conversion, Tower Cooling, Grain Milling Station

bradsul is offline
 
Reply With Quote Quick reply to this message
Old 05-30-2008, 02:34 PM   #4
conpewter
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
conpewter's Avatar
Recipes 
 
Join Date: Nov 2007
Location: East Dundee, Illinois
Posts: 5,131
Liked 42 Times on 37 Posts
Likes Given: 7

Default

Well you should be thinking of midpoint and then there is center of gravity (which is going to be below the midpoint of the keg during most mashes). I'd say put it below the midpoint, but make some other way to secure the keg while mashing, then release your securing device and it is then easy to tip.

__________________

"People should not be afraid of their governments. Governments should be afraid of their people." - V

Primary: Nothin
Secondary: Shady Lord RIS, Water to Barleywine, Pumpkin wine, burnt mead
Kegged: Crappy infected mild
Bottles: Apfelwein, 999 Barleywine, Oatmeal Stout, Robust Porter, Robust smoked porter, Simcoe Smash

conpewter is offline
 
Reply With Quote Quick reply to this message
Old 05-30-2008, 03:26 PM   #5
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,201
Liked 1043 Times on 697 Posts
Likes Given: 28

Default

I went a little unconventional with mine. It's just a hinged cradle into which I plan on bolting the bottom skirt of the keg in 4 places. Even when the keg is full of spent grain, it should be tipable without putting the pivot up any higher. I don't have the keg bolted in just yet so I haven't tried it out.






One thing you might consider as well (I just haven't gotten around to it) is cutting off the top skirt of the keg on the side where the grain will pour out. That rolled lip is going to catch everything on the way out. I've seen people custom fit a piece of stainless that bridges between the opening and goes over the raised edge kind of like a spout/shoot, but it's more work than I can handle.

__________________
BrewHardware.com has a new website. Please check it out and let me know what you think!
New 100% Stainless Steel Heating Elements are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc. Did you know we are also now a full service homebrew shop selling malt, hops, yeast (Wyeast), etc?
Bobby_M is online now
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Infected, to dump or not to dump??? skeeordye11 General Beer Discussion 14 07-17-2009 05:06 PM
need help designing mattybrews All Grain & Partial Mash Brewing 2 05-04-2009 10:36 AM
Tippy Dump on a Brutus Brickhouse Brew Stands 10 03-30-2009 02:36 AM
Tippy Dump? Yorg Equipment/Sanitation 1 03-07-2008 03:08 PM
Tippy MLT Plans? HenryHill Equipment/Sanitation 5 11-14-2007 10:49 PM



Newest Threads

LATEST SPONSOR DEALS