Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Cleaning a HERMS coil before first use
Reply
 
LinkBack Thread Tools
Old 04-06-2010, 02:04 PM   #1
lustreking
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2006
Location: Bethlehem, PA
Posts: 750
Liked 18 Times on 17 Posts
Likes Given: 7

Default Cleaning a HERMS coil before first use

I will probably finish soldering up my HERMS coil tonight, and hope to use it this weekend. What is the best way to clean it out? Pump PBW through it, or something else?

__________________

My brewing site:
http://brewing.lustreking.com

lustreking is offline
 
Reply With Quote Quick reply to this message
Old 04-06-2010, 06:01 PM   #2
Walker
I use secondaries. :p
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Walker's Avatar
Recipes 
 
Join Date: Sep 2005
Location: Cary, NC
Posts: 11,236
Liked 86 Times on 77 Posts
Likes Given: 11

Default

I just finished my coil last week, and did a lot of soldering on my coil. I had excess flux in it and really didn't know what would be the 'proper' thing to do, so.......

I put the thing in my kettle boiled it for about a half hour.
Then flushed it with ground water to get most of the softened flux out.
Then I hooked up the pump and ran the boiling water through the coil.
Then I added oxyclean to the boiling water and ran that through it, too.
Then one more flush with straight boling water, and called it done.

I caught the output of the coil in a bucket and saw that I got a ton of greasy flux out while doing this whole thing.

I used the coil the next night while brewing, but not in full HERMS mode. I just used it as a chiller, but I ran the wort through the coil and had the coil in ice water. The beer I made that night seems fine (no oily surface, nice big fluffy krausen, etc).

Just my $0.02.

__________________
Ground Fault Brewing Co.
Walker is offline
 
Reply With Quote Quick reply to this message
Old 04-07-2010, 04:26 AM   #3
lanvp
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2008
Location: Corvallis, Oregon
Posts: 156
Liked 4 Times on 4 Posts

Default

I soaked my finished coil in Oxyclean (hot water for a couple of hours). Then soaked it in Star-San.

The Oxyclean did a great job removing the heavy grime and the Star-San did a great job finishing it. As a precaution, I repeated the process the morning of the "maiden voyage" (just to be sure!) using my march pump.

Cheers!

__________________
lanvp is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
HERMS HEX coil Drake371 Other 9 12-23-2013 03:06 AM
HERMS Coil Placement EuBrew Brew Stands 4 08-31-2009 07:08 PM
Herms Coil Help rj_hockey Brew Stands 3 03-13-2009 02:11 PM
HERMS HEX coil? Gumbys_Brew Brew Stands 9 02-27-2009 10:18 PM
HERMS Coil... Stevorino Equipment/Sanitation 21 01-30-2009 10:22 PM



Newest Threads

LATEST SPONSOR DEALS