Happy HolidaySs Giveaway - Winners Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Burner FAIL
Reply
 
LinkBack Thread Tools
Old 09-05-2011, 08:02 PM   #1
bajabrewer7
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: san diego, CA
Posts: 84
Default Burner FAIL

Well I finally got my manifold setup and the burners connected, tested all 3 of them without the kegs and they worked fine. Problem started when I tested one with the keg on top, the burner started shooting flames out of the oxygen intake and well, it just didn't work.. I had to raise the kegs using cement blocks for it to work correctly as you can see in the pictures.. what did I do wrong?
Should I build a little platform for the kegs to sit in leaving a space between the stand and them?

here are the pictures:

http://imgur.com/a/Xzrg3#3A5Nx (click here for the whole album)



How does the flame look?

Thanks!!

__________________
bajabrewer7 is offline
 
Reply With Quote Quick reply to this message
Old 09-05-2011, 10:11 PM   #2
kladue
Senior Member
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2006
Location: Turner, Oregon, Oregon most of the time now
Posts: 2,309
Liked 47 Times on 43 Posts

Default

a couple things, first drop the regulator pressure, then close the air shutters a bit until the flame tips turn yellow. With the classic Brutus design there is no where for the flame to go unless about 4" of the bottom skirt is cut off, or 1/2"-3/4" spacers are paced on the frame to let flame out. If you put more flame under the keg you do not always get more heating, just useless flames up the sides. The optimum is where the flame tips just touch the keg bottom, if the light blue area just off the burner touches, then the flame produces lots of CO and soot.
If the flame lifts off the burner the pressure is too high and or the air shutter is opened too much, and you are probably having difficulty lighting them and they are noisy, not quiet like they should be when adjusted correctly.

__________________
kladue is offline
 
Reply With Quote Quick reply to this message
Old 09-06-2011, 12:22 AM   #3
bajabrewer7
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: san diego, CA
Posts: 84
Default

Points taken! I'll have spacers soldered, and play around with the pressure and the air shutters.. I'm VERY new to all of this, and will learn the hard way (and judging by my burnt eyelashes, VERY hard way) haha, thanks!

__________________
bajabrewer7 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keezer lid Fail anycrew Kegerators and Keezers 4 06-10-2011 02:07 PM
My Venturi Fail laiced Brew Stands 9 04-26-2011 12:41 AM
Keg + Bayou Classic SP10 = fail scrambledegg81 Brew Stands 7 01-05-2010 07:56 AM
Which Burner? ChefyTim Brew Stands 3 12-24-2008 11:06 PM
Yuri Brewclost -> KegerAC Will the compressor fail? GuateBrewer Kegerators and Keezers 14 12-21-2007 04:13 AM



Newest Threads

LATEST SPONSOR DEALS