Last days to enter the BrewHardware Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Brew Stand Propane Manifold Design
Reply
 
LinkBack Thread Tools
Old 09-28-2012, 04:26 PM   #1
disney7
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Maryville, TN
Posts: 383
Liked 58 Times on 40 Posts
Likes Given: 7

Default Brew Stand Propane Manifold Design

I'm in the design process for my brew stand and I'd like to use the following Banjo burners:



and it looks like I will need this regulator (I'll be using a 20lb propane tank):



I only plan to have 2 burners to begin with and will add a third if I ever switch from mashing in a cooler to a recirculating fired mash tun.

and it looks like most people use this valve or something like it:



and black iron pipe (1/2" ?)

Can that valve be used to regulate the flame on the burners or is it just an on/off valve? I would prefer to be able to regulate the burners separately, but I will probably never actually use both at the same time.

Should I be ok with the orifice that comes in those burners? Seems like some people are modifying them (why?).

Is this considered a low pressure, high pressure, low BTU, or super mega flames of death gas system?

Is the hardware to connect the regulator and burners to the iron pipe readily available at HomeDepot/Lowes?

Thanks for any input and/or pics. This seems like it should be a pretty simple thing but I want to do it correctly.

__________________
disney7 is offline
 
Reply With Quote Quick reply to this message
Old 09-29-2012, 06:32 PM   #2
rossi46
Senior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
rossi46's Avatar
Recipes 
 
Join Date: Jan 2011
Location: Pasco, WA
Posts: 749
Liked 50 Times on 40 Posts
Likes Given: 5

Default

I have the same burners. i used the 0-30 adjustable high pressure regulator, http://www.bayouclassicdepot.com/785..._regulator.htm . i also used bayou needle valves at the orfice to control the flame, http://www.bayouclassicdepot.com/nv1...urner_part.htm . black pipe from lowes. had a local propane (Ameriagas) make some custom hoses for me, four hoses for $20.

__________________
rossi46 is offline
 
Reply With Quote Quick reply to this message
Old 10-01-2012, 04:39 PM   #3
josterhues
Jace Brewing
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
josterhues's Avatar
Recipes 
 
Join Date: Aug 2012
Location: Lebanon, Cincinnati, Ohio
Posts: 136
Liked 7 Times on 5 Posts

Default

Quote:
Originally Posted by disney7
I'm in the design process for my brew stand and I'd like to use the following Banjo burners:



and it looks like I will need this regulator (I'll be using a 20lb propane tank):



I only plan to have 2 burners to begin with and will add a third if I ever switch from mashing in a cooler to a recirculating fired mash tun.

and it looks like most people use this valve or something like it:



and black iron pipe (1/2" ?)

Can that valve be used to regulate the flame on the burners or is it just an on/off valve?
I am building a stand as well and was wondering if I buy those ball valves (but from HD), can I just use those to control flow?
__________________
josterhues is online now
 
Reply With Quote Quick reply to this message
Old 10-05-2012, 09:42 PM   #4
socalboomer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Riverside, CA
Posts: 235
Liked 4 Times on 3 Posts
Likes Given: 7

Default

The one thing I noticed that most don't seem to have is FROM the manifold TO the burner.

I went to hoseman.com and created a hose that's 3/8" 45deg SAE Female and 1/2" MPTE with 3/8" hose at 3' - was quoted about $25 each. . . I believe that's the correct hose. I haven't actually purchased them yet (something came up) but I believe they're the right one. . .

__________________

On Tap (Nitro): Black Sand Foreign Extra Stout
On Tap 1: Gold Dust Pale.On Tap 2: empty. . .On Tap 3: O'Rally Red
In Secondary: Moonless Midnight RIS
In Primary: Chocolate Palomino, Nightshade Dark Cascadian
Next up:

socalboomer is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help figuring out parts for 3 tier stand propane manifold. whiteheadcraftbeers Brew Stands 5 06-15-2012 02:42 AM
Propane Manifold for Brew Stand Question DrewC Brew Stands 2 11-26-2011 02:03 PM
Need help with Brew stand design...Please!! poislb Brew Stands 19 09-20-2011 03:13 AM
Brew Stand Design j_jones84 Brew Stands 12 08-22-2011 02:04 AM
Brew stand design. wortnz Brew Stands 1 01-10-2011 08:00 AM



Newest Threads

LATEST SPONSOR DEALS