Happy HolidaySs Giveaway - Winners Re-Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > The Switch - Sanke keg serving and fermenting
Reply
 
LinkBack Thread Tools
Old 02-03-2012, 03:33 PM   #11
BargainFittings
Sponsor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 1 reviews
 
BargainFittings's Avatar
Recipes 
 
Join Date: Nov 2008
Location: Allen TX
Posts: 1,915
Liked 56 Times on 48 Posts
Likes Given: 5

Default

No. I plan on utilizing 2 or 3 as fermenters and just push with co2 to the serving kegs.

This will simplify cleaning. Its a bit easier to clean without removing and replacing the spears on the fermenters.

BargainFittings is offline
 
Reply With Quote Quick reply to this message
Old 02-03-2012, 05:59 PM   #12
Texan
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: San Antonio, Texas
Posts: 49
Liked 2 Times on 2 Posts

Default

Very similar ideas, nice. I plan on working out my ideas soon, will be great to compare notes.

__________________
Texan is offline
 
Reply With Quote Quick reply to this message
Old 02-03-2012, 06:50 PM   #13
JuanMoore
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
JuanMoore's Avatar
Recipes 
 
Join Date: Oct 2009
Location: The Old Pueblo
Posts: 17,170
Liked 3253 Times on 3153 Posts
Likes Given: 20

Default

Looking great! I've been contemplating making a spear depressor tool myself, but I'm too lazy. I really like the 1/4bbl size for fermenting, and the 1/6bbl for serving, and IMO the sanke system offers a lot of advantages over cornies. I just wish the kegs didn't cost so much. Keep us updated.

__________________
JuanMoore is offline
 
Reply With Quote Quick reply to this message
Old 02-04-2012, 02:46 PM   #14
cheese
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2008
Location: Israel
Posts: 138
Liked 1 Times on 1 Posts

Default

Quote:
Originally Posted by BargainFittings View Post
[B][COLOR="DarkRed"][SIZE="3"]
Fermenting setup will be documented when I get the parts. Plan to use 2" tri-clover and to modify some 2" caps by drilling and adding some 1/2" pickup tubes through them.
Here's mine, brass compression fitting, drilled to fit the 3/8 tube and a tire valve. the brass part is soldered to hold pressure, a lock nut alone wasn't good enough.
I've added a ball valve to the pickup tube from morebeer, highly recommended.




cheese is offline
 
Reply With Quote Quick reply to this message
Old 02-04-2012, 07:34 PM   #15
Bezel
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Boise, Idaho
Posts: 90
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Hey cheese, would it be possible to fit gass and liquid ball lock post on the 2 blank? Trying to set up presurized fermentation and carb with ball lock and being able to get rid of the sanke D and spear.

__________________
Bezel is offline
 
Reply With Quote Quick reply to this message
Old 02-04-2012, 11:24 PM   #16
Lucky_Chicken
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Bloomfield, IA
Posts: 791
Liked 34 Times on 25 Posts
Likes Given: 4

Default

I have thought about switching also... the cost holds me back... maybe one day when i decide to go public

Lucky_Chicken is offline
 
Reply With Quote Quick reply to this message
Old 02-06-2012, 01:53 PM   #17
Lucky_Chicken
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Bloomfield, IA
Posts: 791
Liked 34 Times on 25 Posts
Likes Given: 4

Default cleaning without removing the spear?

in your first post you mention pumping up the dip tube and draining out the gas side. with enough flow this should work to clean the inside of the keg but how do you know if you have the outside of the dip tube clean?

__________________

Jeremy @ Lucky Chicken Brewery

Electric Build

Kegerator build

Lucky_Chicken is offline
 
Reply With Quote Quick reply to this message
Old 02-06-2012, 02:31 PM   #18
BargainFittings
Sponsor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 1 reviews
 
BargainFittings's Avatar
Recipes 
 
Join Date: Nov 2008
Location: Allen TX
Posts: 1,915
Liked 56 Times on 48 Posts
Likes Given: 5

Default

I will test my cleaning regimen and pull some spears to be sure.

I'm emulating the cleaning cycle they use to wash kegs. Of course they have a custom connector that clamps the keg and then shoots the water at higher velocities. I'm sure their flow is higher so I'll use more time pumping to get the kegs clean.

__________________

Wayne


Stainless Weldless kits and Flat $5.00 shipping to USA 50 States!
STAINLESS STEEL 3 piece valves $10.95! 2 piece valves $7.99
BargainFittings.com

BargainFittings is offline
 
Reply With Quote Quick reply to this message
Old 02-06-2012, 02:50 PM   #19
wilserbrewer
Sponsor
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 9 reviews
 
wilserbrewer's Avatar
Recipes 
 
Join Date: May 2007
Location: Jersey Shore, Jersey
Posts: 7,275
Liked 573 Times on 468 Posts
Likes Given: 11

Default

Quote:
Originally Posted by JuanMoore View Post
Looking great! I've been contemplating making a spear depressor tool myself, but I'm too lazy. I really like the 1/4bbl size for fermenting, and the 1/6bbl for serving, and IMO the sanke system offers a lot of advantages over cornies. I just wish the kegs didn't cost so much. Keep us updated.
Initially, I also thought that you needed to depress the spear to reinstall the spiral ring. I used a large socket and a piece of wood, DIY type tool. I have since started using the method linked below and the retaining rings can be easily reinstalled w/ just a pair of pliers...with a little practice it takes seconds.

http://www.homebrewtalk.com/f35/inst...nke-keg-64128/
__________________
wilserbrewer BIAB bags
custom sized BIAB Bags, hop bags and ratchet pulleys at reasonable prices


Http://biabbags.webs.com/

Corona Mill Bucket System V. 2
wilserbrewer is online now
 
Reply With Quote Quick reply to this message
Old 02-06-2012, 03:27 PM   #20
-MG-
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Cedar Rapids, IA
Posts: 316
Liked 1 Times on 1 Posts
Likes Given: 4

Default

I've been just using a small screw driver with a tip small enough to pry out the ring, and when it comes time to put it back in I use the same screw driver and a hammer to nudge it back in the fitting. Starting to get good at it and can put it back on under a minute.

__________________
-MG- is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dual Stage Cooler - fermenting/serving horseinmay Kegerators and Keezers 3 10-19-2011 04:40 PM
Question about sanke keg fermenting crlova2 Fermenters 20 10-13-2011 03:17 PM
splitting chest freezer for serving and fermenting? twd000 Kegerators and Keezers 11 09-05-2011 04:32 AM
PID, SSR, DPST switch Bruwsomtin Brew Stands 1 08-26-2010 06:25 PM
Illuminated switch bkloos Brew Stands 9 05-27-2010 03:07 AM



Newest Threads

LATEST SPONSOR DEALS