Happy HolidaySs Giveaway - Winners Re-Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > Single Tier HERMS build
Reply
 
LinkBack Thread Tools
Old 03-04-2012, 06:06 PM   #111
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,257
Liked 1060 Times on 707 Posts
Likes Given: 28

Default

It's probably to force the element on rather than control with the PID. Manual "mode" on the PID would still require the auto mode on the switch.

__________________
BrewHardware.com has a new website. Please check it out and let me know what you think!
New 100% Stainless Steel Heating Elements are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc. Did you know we are also now a full service homebrew shop selling malt, hops, yeast (Wyeast), etc?
Bobby_M is online now
 
Reply With Quote Quick reply to this message
Old 03-05-2012, 12:44 AM   #112
drkwoods
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2010
Location: Chino Hills, CA
Posts: 415
Liked 11 Times on 8 Posts
Likes Given: 12

Default

The mash dump. Obviously I need a shorter trash can.

image-3628005385.jpg   image-3825770707.jpg   image-412117360.jpg   image-2131045837.jpg  
__________________

drkwoods
DarKWoods Brewing
My Unique Single Tier Brut-esque HERMS Build:
http://www.homebrewtalk.com/f51/sing...-build-293204/

drkwoods is offline
 
Reply With Quote Quick reply to this message
Old 03-05-2012, 02:41 AM   #113
drkwoods
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2010
Location: Chino Hills, CA
Posts: 415
Liked 11 Times on 8 Posts
Likes Given: 12

Default

Quote:
Originally Posted by Bobby_M
It's probably to force the element on rather than control with the PID. Manual "mode" on the PID would still require the auto mode on the switch.
Yea the BK an HLT have HOA switches (Hand/Off/Auto). I messed with PID mode and manual after auto tune and there just seemed to be more accuracy on my system with on/off mode. FWIW this PID can switch from Manu to PID mode with a button on the front of the unit. But not from Manu to on/off mode
image-2927811121.jpg  
__________________

drkwoods
DarKWoods Brewing
My Unique Single Tier Brut-esque HERMS Build:
http://www.homebrewtalk.com/f51/sing...-build-293204/

drkwoods is offline
 
Reply With Quote Quick reply to this message
Old 03-05-2012, 03:10 AM   #114
day_trippr
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Stow, MA
Posts: 11,191
Liked 1380 Times on 1115 Posts

Default

Quote:
Originally Posted by drkwoods View Post
I have a March 815 and the new HF from More Beer. Externally they are identical.. its the impeller they changed. Its supposed to prevent cavitation. Running them both side by side I can say the HF does do a better job..

Here's a link to one thread on the differences and upgrading to it, if you wish to.
http://www.homebrewtalk.com/f11/can-...ump-hf-213577/

Cheers!!
My pumps are the Morebeer H315HF, I bought them from Morebeer.
And I'm still pretty sure they're the March 815 pumps by any name.

Btw, that link was to upgrade an 809HS...

Cheers!
__________________
day_trippr is online now
 
Reply With Quote Quick reply to this message
Old 03-05-2012, 04:28 AM   #115
drkwoods
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2010
Location: Chino Hills, CA
Posts: 415
Liked 11 Times on 8 Posts
Likes Given: 12

Default

Quote:
Originally Posted by day_trippr View Post
My pumps are the Morebeer H315HF, I bought them from Morebeer.
And I'm still pretty sure they're the March 815 pumps by any name.

Btw, that link was to upgrade an 809HS...

Cheers!
the 315 is an 809. 315 is MoreBeer's part # and 809 is March's #. The new 315HF pump (it is an upgraded 809, go look at The link again.) has a bigger impeller I was able to easily recirc a mild boil (simmer) without cavitation. My system has an old 809 (315) and the new upgraded 809 like you have. (315HF).
__________________

drkwoods
DarKWoods Brewing
My Unique Single Tier Brut-esque HERMS Build:
http://www.homebrewtalk.com/f51/sing...-build-293204/

drkwoods is offline
 
Reply With Quote Quick reply to this message
Old 03-05-2012, 03:05 PM   #116
Junkster
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: North Central, Ohio
Posts: 508
Liked 30 Times on 21 Posts
Likes Given: 3

Default

Quote:
Originally Posted by drkwoods View Post
The mash dump. Obviously I need a shorter trash can.
My old rig had a similar dump setup. I made a "hoe" that had a blade cut to the same radius as the inside of the keg with a handle about 3 feet long with a "T" handle on the end. This worked great for getting the spent grain out of the tun quickly. My tun didn't lay over as far as yours & I attached a chute to keep the grain from falling into the upper skirt area.

I made the hoe from SS scrap and the blade was made from a small, cheap plastic cutting board but wood would work well too. The chute was SS but I suppose something similar could be made from a plastic bucket or any sheet metal.

It looks like a shorter trash can in your case will work fine....
__________________
Junkster is offline
 
Reply With Quote Quick reply to this message
Old 03-05-2012, 05:55 PM   #117
drkwoods
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2010
Location: Chino Hills, CA
Posts: 415
Liked 11 Times on 8 Posts
Likes Given: 12

Default

Quote:
Originally Posted by Junkster View Post
My old rig had a similar dump setup. I made a "hoe" that had a blade cut to the same radius as the inside of the keg with a handle about 3 feet long with a "T" handle on the end. This worked great for getting the spent grain out of the tun quickly. My tun didn't lay over as far as yours & I attached a chute to keep the grain from falling into the upper skirt area.

I made the hoe from SS scrap and the blade was made from a small, cheap plastic cutting board but wood would work well too. The chute was SS but I suppose something similar could be made from a plastic bucket or any sheet metal.

It looks like a shorter trash can in your case will work fine....
Yea Im gonna poke around and see what shorter can would work, since this thing can go reverse vertical..
__________________

drkwoods
DarKWoods Brewing
My Unique Single Tier Brut-esque HERMS Build:
http://www.homebrewtalk.com/f51/sing...-build-293204/

drkwoods is offline
 
Reply With Quote Quick reply to this message
Old 03-05-2012, 06:13 PM   #118
motobrewer
I'm no atheist scientist, but...
HBT_SUPPORTER.png
Feedback Score: 1 reviews
Recipes 
 
Join Date: Oct 2009
Location: Thiensville, Wisconsin
Posts: 6,965
Liked 244 Times on 211 Posts
Likes Given: 392

Default

how do you like the camlocks? any pics of how your mash tun is configured?

__________________
Quote:
The man who intoxicates himself on bad whisky is sometimes moved to kill his wife and set his house on fire, but the victim of applejack is capable of blowing up a whole town with dynamite and of reciting original poetry to every surviving inhabitant.

– "A Wicked Beverage," New York Times, April 10, 1894
motobrewer is offline
 
Reply With Quote Quick reply to this message
Old 03-05-2012, 10:08 PM   #119
drkwoods
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2010
Location: Chino Hills, CA
Posts: 415
Liked 11 Times on 8 Posts
Likes Given: 12

Default

Quote:
Originally Posted by motobrewer
how do you like the camlocks? any pics of how your mash tun is configured?
The Camlocks are great! I set up every connection that way even the water supply. You can get away barehanded with the finger rings but I usually slap on the brewing gloves for the BK connections. My MLT is a SS false bottom
From Saabco http://www.brewmagic.com/products/false-bottom-2 My HEX returns to the mash thru a SS swaged in coupling near the top of its side. It feeds a 1/2" PEX pipe that is bent to fit 360* around the top of the inside kettle. The PEX pipe is drilled in about 20 places all at a 45* angle. This achieves a swirl on the surface of the mash and prevents problems etc. The kettle is bottom Drained so I can sparge every drop out if I wish
Also the height of the PEX pipe is adjustable so it can sit right atop the mash. This way I prevent hot side air-ation
image-3138082129.jpg  
__________________

drkwoods
DarKWoods Brewing
My Unique Single Tier Brut-esque HERMS Build:
http://www.homebrewtalk.com/f51/sing...-build-293204/

drkwoods is offline
 
Reply With Quote Quick reply to this message
Old 03-05-2012, 10:19 PM   #120
drkwoods
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2010
Location: Chino Hills, CA
Posts: 415
Liked 11 Times on 8 Posts
Likes Given: 12

Default

Here's a Video look inside the kettles
www.youtube.com/watch?v=LlBlRkj2nXo&feature=youtube_gdata_player

__________________

drkwoods
DarKWoods Brewing
My Unique Single Tier Brut-esque HERMS Build:
http://www.homebrewtalk.com/f51/sing...-build-293204/

drkwoods is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brewery Build - Single Tier HERMS mplutodh1 Brew Stands 166 11-29-2013 03:40 AM
Pumps for Single Tier Herms _d_ Brew Stands 5 09-30-2011 05:28 PM
Single tier HERMS with tri clovers all around Sarrsipius Brew Stands 10 12-20-2010 12:51 AM
Single-tier propane/electric HERMS/RIMS rig?!!!??! Cyan Brew Stands 27 09-03-2010 04:47 PM
Single tier HERMS reveal. SSRider Brew Stands 17 01-24-2009 04:34 AM



Newest Threads

LATEST SPONSOR DEALS