Happy HolidaySs Giveaway - Winners Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > Self leveling epoxy.
Reply
 
LinkBack Thread Tools
Old 01-23-2013, 03:51 AM   #1
drakeskakes
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 53
Liked 4 Times on 1 Posts
Likes Given: 3

Default Self leveling epoxy.

I was wondering if anyone had a good resource on tutorials for using self leveling epoxy. I'm sure it's rather simple but I've seen some really bad examples on other peoples projects. I want it to be a "one and done" project.

I'm using joined wood for the deck of my keezer build and want to avoid any chances of liquid getting between the cracks and causing swelling.

Hopefully there is a few good write ups on it. I tried searching youtube but surprisingly, nothing popped up.

Thanks

__________________
drakeskakes is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 06:04 AM   #2
acidrain
Feedback Score: 3 reviews
Recipes 
 
Join Date: Jul 2012
Location: Seattle, Washington
Posts: 1,733
Liked 136 Times on 118 Posts
Likes Given: 30

Default

I have some experience in this... Use appropriate gloves, clothes, eye protection, etc.
Do this in a clean work area. The epoxy stays open a long time (24 hrs or more in most cases) so any dirt or dust that gets blown around is going to stick in it.
Get your table top, lid or whatever you're your project is perfectly level and suspended so that the edges are not touching anything, and sitting over some sacrificial drop cloths.
Mix the exact ratio by measuring "A" in one disposable measuring cup, "B" in a second one, and then pour both together into a third.
Stir well, but slowly to avoid air bubbles. Scrape the sides and bottom many times when stirring.
Pour into a fourth pot, and stir some more.
Slowly pour mixed epoxy onto the project starting in the middle working the puddle outward towards the edges, but always pouring into the established puddle.
Use a bondo spreader to move the puddle around if needed (use a light touch). the puddle should be running off the edge now... make sure the edges are all wetted out.
Once the epoxy is spread evenly, use a propane torch to pop any bubbles with a quick sweeping motion over the surface. Make sure all the bubbles get popped.
Cure at the appropriate temp.
Once it's fully cured, you can sand off the drippy edges.
The epoxy can be sanded and polished if you have the right equipment.
Good luck!

__________________

Keg #1: Brown Bomber Bourbon/Oak Vanilla Porter
Keg #2: Lawnmower APA
Bottled: Mjolnir Mead, Lazy Daze Hefe.

acidrain is offline
drakeskakes Likes This 
Reply With Quote Quick reply to this message
Old 01-23-2013, 06:20 AM   #3
drakeskakes
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Posts: 53
Liked 4 Times on 1 Posts
Likes Given: 3

Default

Thank you for the detailed information. That post helped a lot. My only question is the "Don't be touching anything"

I was planning on using it for the lid of the keezer. I was going to put the wood down and have an 1/8th lip from the wood to the top of the border a, creating a "sandbox" like structure. Just instead of sand, it's wood panel
Should I epoxy it first, then put the outer edges on the board?

__________________
drakeskakes is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 01:49 PM   #4
vike4life
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Location: Bay Village, Ohio
Posts: 14
Liked 2 Times on 1 Posts

Default

Drake, I am also in the process of making an epoxy counter-top for the bar I am installing in my basement. I will be making a wood mold, then placing wine corks in the mold then pouring the epoxy over the top of it.

Let me know how yours goes.

__________________
vike4life is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 06:19 PM   #5
Hang Glider
Beer Drinker
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
Hang Glider's Avatar
Recipes 
 
Join Date: Mar 2007
Location: North Augusta, SC
Posts: 3,159
Liked 149 Times on 119 Posts
Likes Given: 102

Default

Quote:
Originally Posted by vike4life View Post
... I will be making a wood mold, then placing wine corks in the mold then pouring the epoxy over the top of it...
the corks will float - you may want to do a thin coat and place the corks while wet, then cover with another coat after the first coat dries and holds the corks down.
__________________
Hang Glider is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 07:01 PM   #6
acidrain
Feedback Score: 3 reviews
Recipes 
 
Join Date: Jul 2012
Location: Seattle, Washington
Posts: 1,733
Liked 136 Times on 118 Posts
Likes Given: 30

Default

Yeah, if you've formed a lip to hold the epoxy in, then just work up to it.
Get it perfectly level though... it will run over the edge if not, or at least it would be thicker on one edge.

__________________

Keg #1: Brown Bomber Bourbon/Oak Vanilla Porter
Keg #2: Lawnmower APA
Bottled: Mjolnir Mead, Lazy Daze Hefe.

acidrain is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 07:09 PM   #7
NivekD
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
NivekD's Avatar
Recipes 
 
Join Date: Dec 2012
Location: West Jordan, Utah
Posts: 665
Liked 100 Times on 83 Posts
Likes Given: 32

Default

I've used EnviroTex Lite for several projects and love the stuff...

http://eti-usa.com/envirotex-lite/

__________________
NivekD is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 07:43 PM   #8
vike4life
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Location: Bay Village, Ohio
Posts: 14
Liked 2 Times on 1 Posts

Default

Hang Glider,

I left out that i was going to be using wood glue to glue down the corks. Do you think wood glue will work? or should I go with something else?

__________________
vike4life is offline
 
Reply With Quote Quick reply to this message
Old 01-23-2013, 10:07 PM   #9
patthebrewer
Manasquan River Brewing LLC
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
patthebrewer's Avatar
Recipes 
 
Join Date: Sep 2012
Location: , allenwood, nj
Posts: 684
Liked 55 Times on 48 Posts
Likes Given: 141

Default

Or just hot glue the cork down, and pour over them.

__________________
Manasquan River Brewing LLC
patthebrewer is offline
 
Reply With Quote Quick reply to this message
Old 01-24-2013, 03:01 AM   #10
Hang Glider
Beer Drinker
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
Hang Glider's Avatar
Recipes 
 
Join Date: Mar 2007
Location: North Augusta, SC
Posts: 3,159
Liked 149 Times on 119 Posts
Likes Given: 102

Default

yep - just as long as they're held down so they don't work their way up to the surface.

pictures as you build? or when done?
we wanna see this!

__________________
Hang Glider is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
My Epoxy beer StittsvilleJames Beginners Beer Brewing Forum 1 03-01-2011 12:23 AM
BPA-epoxy resin zelltj General Beer Discussion 2 10-16-2010 09:47 PM
Leveling Keggles? Cpt_Kirks Equipment/Sanitation 1 09-19-2010 06:58 PM
Epoxy in mash tun? pokey Equipment/Sanitation 10 02-27-2010 04:58 PM
Self-Leveling compound? I have questions for a basement floor Boerderij_Kabouter General Chit Chat 22 10-29-2009 10:02 PM



Newest Threads

LATEST SPONSOR DEALS