Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > sanke conversion
Reply
 
LinkBack Thread Tools
Old 03-15-2013, 02:26 AM   #1
rcog
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2013
Posts: 36
Liked 1 Times on 1 Posts

Default sanke conversion

I happened to find a used sankey keg at a yard sale so I bought it to try my conversion...........
I started by taking out the split ring that holds the ball valve in


http://www.homebrewtalk.com/attachme...1&d=1363309654


Then with a twist of the ball valve to line up the tabs in the slots the ball valve pulled straight out

http://www.homebrewtalk.com/attachme...1&d=1363309654


http://www.homebrewtalk.com/attachme...1&d=1363309654.


I purchased a 2" tri clamp cover and clamp and drilled and tap 2 1/4"npt holes at approx 10 degrees

http://www.homebrewtalk.com/attachme...1&d=1363309654


then spot faced a 3/4" dia x approx .100 deep on the bottom of one of those holes and silver soldered a 3/4 stainless tube in the spot face and cut it to the same length of the total length of the original ball valve and tube seems to work great

http://www.homebrewtalk.com/attachme...1&d=1363309654

I did add a relief valve as you can see in the pics just for added safety

005.jpg   006.jpg   007.jpg   002.jpg   003.jpg  

__________________
rcog is offline
 
Reply With Quote Quick reply to this message
Old 03-15-2013, 02:28 AM   #2
rcog
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2013
Posts: 36
Liked 1 Times on 1 Posts

Default

Now I have the ball lock fittings so this keg will attach to most any homebrew system

__________________
rcog is offline
 
Reply With Quote Quick reply to this message
Old 03-16-2013, 02:16 AM   #3
tm999xxx
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Ktown, New Jersey
Posts: 28
Liked 1 Times on 1 Posts

Default

Very nice

__________________
tm999xxx is offline
 
Reply With Quote Quick reply to this message
Old 03-16-2013, 02:50 AM   #4
SleepyCreekBrews
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
SleepyCreekBrews's Avatar
Recipes 
 
Join Date: Jul 2012
Location: Leesville, NC
Posts: 292
Liked 24 Times on 20 Posts
Likes Given: 90

Default

I like the metalwork you did, but I cant help but think hooking up a D-Type coupler would be easy, affordable and versatile.

__________________

Sleepy Creek Brewery, Leesville, NC
http://www.facebook.com/pages/Sleepy...743?ref=stream

SleepyCreekBrews is offline
AT-JeffT Likes This 
Reply With Quote Quick reply to this message
Old 03-16-2013, 03:02 AM   #5
rcog
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2013
Posts: 36
Liked 1 Times on 1 Posts

Default

Ive had lots of compliments on this from my friends on how simple ans nice this setup looks thanks

__________________
rcog is offline
 
Reply With Quote Quick reply to this message
Old 03-16-2013, 09:47 AM   #6
MaxOut
Feedback Score: 1 reviews
Recipes 
 
Join Date: Jan 2011
Location: Hughesville, Maryland
Posts: 727
Liked 61 Times on 43 Posts
Likes Given: 2

Default

Looks great! Good idea and well done!

How much $$ do you have in the conversion?

Could be used as a fermenter if you make one with a shortened dip tube.

MaxOut is offline
 
Reply With Quote Quick reply to this message
Old 03-16-2013, 11:18 AM   #7
rcog
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2013
Posts: 36
Liked 1 Times on 1 Posts

Default

I didnt really keep track.............The most expensive parts are the fittings I bought them from midwest brewing. The tri clamp parts were bought from MSC. So fittings total was about $22 Tri clamp cap and cover about $15. I did machining myself ...so Im guessing I have under $40 in it.. and fermenting would be a grest idea too

__________________
rcog is offline
 
Reply With Quote Quick reply to this message
Old 03-16-2013, 01:12 PM   #8
tm999xxx
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Ktown, New Jersey
Posts: 28
Liked 1 Times on 1 Posts

Default

then spot faced a 3/4" dia x approx .100 deep on the bottom

Lost me here? Have a pic of that?

__________________
tm999xxx is offline
 
Reply With Quote Quick reply to this message
Old 03-16-2013, 08:09 PM   #9
rcog
Feedback Score: 1 reviews
Recipes 
 
Join Date: Mar 2013
Posts: 36
Liked 1 Times on 1 Posts

Default

I don't have a pic of the spot face. But in the last pic where you see the silver solder joint for the stainless tube that is where it is.. Basically its just a 3/4" cut .100 deep so the tube can slide in and make a better solder joint

__________________
rcog is offline
 
Reply With Quote Quick reply to this message
Old 03-16-2013, 08:31 PM   #10
tm999xxx
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Ktown, New Jersey
Posts: 28
Liked 1 Times on 1 Posts

Default

Ah ha..beautiful.. Annular cutter?

__________________
tm999xxx is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
cornelius to sanke conversion cutter22 Bottling/Kegging 23 10-06-2012 02:52 AM
Sold - Sanke Keg Fermenter w/ Conversion Kit cscade For Sale 9 02-27-2012 01:31 PM
Sanke keg conversion to fermenter??? sleepystevenson Equipment/Sanitation 26 10-08-2011 04:27 PM
Sanke Keg Conversion and Polish br1dge Kettles, Mash Tuns, & Hot Liquor Tanks 8 05-07-2011 08:48 PM
For Sale - Sanke keg fermentor conversion kit bubbachunk For Sale 15 04-19-2011 01:43 AM



Newest Threads

LATEST SPONSOR DEALS