BrewHardware Giveaway- Winners Drawn - 24 hours to claim!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > Problems with Corney Kegs
Reply
 
LinkBack Thread Tools
Old 03-02-2011, 07:55 PM   #1
DoubleFisted
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: Muscatine, Iowa
Posts: 176
Liked 1 Times on 1 Posts
Likes Given: 3

Default Problems with Corney Kegs

I have been making a few sodas lately so I boost up the psi to 30. When I do this I get a slight hissing sound out of my corney kegs where the quick disconnect and "nipple" goes together. Does that mean my seals are bad? because it never did it when I ran 12 psi for my beers.

__________________

Cheers!

Brew Master Alderin
DoubleFisted Brew

DoubleFisted is offline
 
Reply With Quote Quick reply to this message
Old 03-02-2011, 08:17 PM   #2
-TPM-
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: Arrowhead, CA
Posts: 87
Default

I have a couple that stick a bit, usually if I push the poppet in it stops. You could always try using a bit of lube on it too (take it apart). If you still have a problem you could always buy a replacement poppet.

__________________
-TPM- is offline
 
Reply With Quote Quick reply to this message
Old 03-02-2011, 08:23 PM   #3
Hang Glider
Beer Drinker
HBT_SUPPORTER.png
Feedback Score: 1 reviews
 
Hang Glider's Avatar
Recipes 
 
Join Date: Mar 2007
Location: North Augusta, SC
Posts: 3,170
Liked 152 Times on 121 Posts
Likes Given: 108

Default

do you replace your o-rings regularly?

__________________
Hang Glider is offline
 
Reply With Quote Quick reply to this message
Old 03-02-2011, 08:41 PM   #4
DoubleFisted
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: Muscatine, Iowa
Posts: 176
Liked 1 Times on 1 Posts
Likes Given: 3

Default

This keg is actually only been used one other time before today so I have not replaced the seals. So maybe just take the quick disconnect off and press the poppet down with like a screw driver or something?

__________________

Cheers!

Brew Master Alderin
DoubleFisted Brew

DoubleFisted is offline
 
Reply With Quote Quick reply to this message
Old 03-02-2011, 08:47 PM   #5
bja
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2007
Location: Pittsburgh
Posts: 1,876
Liked 128 Times on 96 Posts

Default

Quote:
Originally Posted by DoubleFisted View Post
This keg is actually only been used one other time before today so I have not replaced the seals. So maybe just take the quick disconnect off and press the poppet down with like a screw driver or something?
No, the o-ring needs to be replaced.
__________________

____________________________________________

I know it just wouldn't be right to kill all the stupid people that we meet, but do you think it would be appropriate to just remove all of the warning labels and let nature take its course?

Life is tough. It's tougher if you're stupid.

bja is offline
 
Reply With Quote Quick reply to this message
Old 03-02-2011, 08:57 PM   #6
-TPM-
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2009
Location: Arrowhead, CA
Posts: 87
Default

Yeah that'd work, you just want to reseat it.

__________________
-TPM- is offline
 
Reply With Quote Quick reply to this message
Old 03-02-2011, 09:20 PM   #7
Catt22
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Posts: 4,998
Liked 58 Times on 55 Posts
Likes Given: 51

Default

Quote:
Originally Posted by DoubleFisted View Post
I have been making a few sodas lately so I boost up the psi to 30. When I do this I get a slight hissing sound out of my corney kegs where the quick disconnect and "nipple" goes together. Does that mean my seals are bad? because it never did it when I ran 12 psi for my beers.
My guess would be that the O-ring on the post is worn out or otherwise damaged. It's not the poppet if it is leaking when the quick disconnect is attached. If it leaks when the disconnect is not attached, it is likely the poppet, but you should be able to see the leak if you wet the poppet and it bubbles. Least likely would be the dip tube O-ring as they don't see much wear and tear, but they can eventually fail as well. The good news is that the post O-ring is very easy to remove and replace. Cheap too.
__________________
Catt22 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cutting apart a corney keg ghart999 Kettles, Mash Tuns, & Hot Liquor Tanks 13 06-17-2010 08:11 PM
Space above corney ascha Kegerators and Keezers 9 05-10-2010 01:08 PM
WTF... problems with rust in SS kegs around welds and HW heater element help! flananuts Kettles, Mash Tuns, & Hot Liquor Tanks 5 01-31-2010 01:31 PM
Corney Rack JayInJersey Other 2 10-08-2009 11:28 PM
Corney Chiller? JayInJersey Kegerators and Keezers 5 09-28-2009 06:00 PM



Newest Threads

LATEST SPONSOR DEALS