I did not take any pictures when I built it. I actually built the entire unit over one weekend. I had dismantled the top and drew the plans during the week, but the build went pretty fast. I was going to put the co2 and nitrogen tanks outside of the freezer but I have plenty of room inside; it is a 14 cubic foot unit. I have 9 inches of cabinet space on each side of the freezer.
The tile was some left over glass tile from Lowes. I used it because it as much lighter than anything else I could find. With 1/2 in plywood inside the top and 3/4 in on top the lid is pretty heavy.
The skin is tongue and groove from Lowe's and I just attached them to the base and collar with 2x4's. This gives plenty of air flow around the freezer.
The base is simply a piece of 3/4 in plywood and I placed the casters under the feet of the freezer.
Thanks again for the compliment.