Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Kegerators and Keezers (http://www.homebrewtalk.com/f252/)
-   -   Need help - Tap Identification (http://www.homebrewtalk.com/f252/need-help-tap-identification-181223/)

GRHunter 06-06-2010 02:54 PM

Need help - Tap Identification
 
2 Attachment(s)

I hosted a graduation party yesterday and learned a valuable lesson. My friends, family, and neighbors are much dumber that I thought. I must have had to explain what beer was on each tap about a gajillion times. As you can see in the photos below I have a four tap system, so I didn't think it would be that difficult for everyone to remember. Especially since only three of the taps had beer in them. I finally just used some masking tape and a marker to label the taps.

So now I would like to add a permanent and more attractive solution to this problem. Because the taps are in a fairly high traffic area I don't want to use larger tap handles. I need something that will sit on the lid that can be changed to reflect the current beers on tap. Moreover, I'd like to be able to utilize a printed label and not require any hand writing. Also, as I am planning on adding some type of mug storage on the lid I don't want the label system to take up too much space. So please look at the photos below and let me know if you have any suggestions, thanks.


GRHunter 06-06-2010 02:54 PM

Need help - Tap Identification
 
2 Attachment(s)

I hosted a graduation party yesterday and learned a valuable lesson. My friends, family, and neighbors are much dumber that I thought. I must have had to explain what beer was on each tap about a gajillion times. As you can see in the photos below I have a four tap system, so I didn't think it would be that difficult for everyone to remember. Especially since only three of the taps had beer in them. I finally just used some masking tape and a marker to label the taps.

So now I would like to add a permanent and more attractive solution to this problem. Because the taps are in a fairly high traffic area I don't want to use larger tap handles. I need something that will sit on the lid that can be changed to reflect the current beers on tap. Moreover, I'd like to be able to utilize a printed label and not require any hand writing. Also, as I am planning on adding some type of mug storage on the lid I don't want the label system to take up too much space. So please look at the photos below and let me know if you have any suggestions, thanks.



All times are GMT. The time now is 02:48 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.