Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Kegerators and Keezers (http://www.homebrewtalk.com/f252/)
-   -   My Keezer - The Documentary (http://www.homebrewtalk.com/f252/my-keezer-documentary-308787/)

t3e871 02-28-2012 11:19 PM

5 Attachment(s)

Here is the cart of African mahogany I picked each board from the local lumber yard. One was almost 20" wide! I originally thought about using it as the bar top, but have decided to go with tile or stone.

I start all of my woodworking projects with a rough draft on paper. I now add those drawings into sketchup for accuracy.

I started with 50 BF of lumber and two full sheets of 1/4" mahogany plywood.


t3e871 02-28-2012 11:19 PM

5 Attachment(s)

Here is the cart of African mahogany I picked each board from the local lumber yard. One was almost 20" wide! I originally thought about using it as the bar top, but have decided to go with tile or stone.

I start all of my woodworking projects with a rough draft on paper. I now add those drawings into sketchup for accuracy.

I started with 50 BF of lumber and two full sheets of 1/4" mahogany plywood.


t3e871 02-28-2012 11:19 PM

5 Attachment(s)

Here is the cart of African mahogany I picked each board from the local lumber yard. One was almost 20" wide! I originally thought about using it as the bar top, but have decided to go with tile or stone.

I start all of my woodworking projects with a rough draft on paper. I now add those drawings into sketchup for accuracy.

I started with 50 BF of lumber and two full sheets of 1/4" mahogany plywood.


t3e871 02-28-2012 11:19 PM

5 Attachment(s)

Here is the cart of African mahogany I picked each board from the local lumber yard. One was almost 20" wide! I originally thought about using it as the bar top, but have decided to go with tile or stone.

I start all of my woodworking projects with a rough draft on paper. I now add those drawings into sketchup for accuracy.

I started with 50 BF of lumber and two full sheets of 1/4" mahogany plywood.


t3e871 02-28-2012 11:19 PM

5 Attachment(s)

Here is the cart of African mahogany I picked each board from the local lumber yard. One was almost 20" wide! I originally thought about using it as the bar top, but have decided to go with tile or stone.

I start all of my woodworking projects with a rough draft on paper. I now add those drawings into sketchup for accuracy.

I started with 50 BF of lumber and two full sheets of 1/4" mahogany plywood.


t3e871 02-28-2012 11:22 PM

5 Attachment(s)

Next I laid out the parts from my cut list onto the lumber and picked the best grain to show. I also had a homebrew before I dimensioned the boards into the proper thickness and width and cut the panels from the plywood.


t3e871 02-28-2012 11:22 PM

5 Attachment(s)

Next I laid out the parts from my cut list onto the lumber and picked the best grain to show. I also had a homebrew before I dimensioned the boards into the proper thickness and width and cut the panels from the plywood.


t3e871 02-28-2012 11:22 PM

5 Attachment(s)

Next I laid out the parts from my cut list onto the lumber and picked the best grain to show. I also had a homebrew before I dimensioned the boards into the proper thickness and width and cut the panels from the plywood.


t3e871 02-28-2012 11:22 PM

5 Attachment(s)

Next I laid out the parts from my cut list onto the lumber and picked the best grain to show. I also had a homebrew before I dimensioned the boards into the proper thickness and width and cut the panels from the plywood.


t3e871 02-28-2012 11:22 PM

5 Attachment(s)

Next I laid out the parts from my cut list onto the lumber and picked the best grain to show. I also had a homebrew before I dimensioned the boards into the proper thickness and width and cut the panels from the plywood.



All times are GMT. The time now is 09:29 PM.

Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.