Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Kegerators and Keezers (http://www.homebrewtalk.com/f252/)
-   -   Mini Fridge to fit 1/2bbl Sanke (http://www.homebrewtalk.com/f252/mini-fridge-fit-1-2bbl-sanke-372952/)

Hodges 12-11-2012 04:06 AM

2 Attachment(s)

I just built a Kegerator for a 5 gallon Cornelius keg in a Kenmore mini-fridge. I found the height and diameter of the keg first before I looked for a fridge. You should do the same. Also, determine where the coolant lines run. I realized, after I purchased my fridge, the lines ran through the freezer tray. Not the end of the world, it just changes the thermostat control; how fast and how cold it gets.

Long story short, look for a model with a flat bottom inside that fits the 1/2 sanke.

Hope this helps,

Hodges


Hodges 12-11-2012 04:06 AM

2 Attachment(s)

I just built a Kegerator for a 5 gallon Cornelius keg in a Kenmore mini-fridge. I found the height and diameter of the keg first before I looked for a fridge. You should do the same. Also, determine where the coolant lines run. I realized, after I purchased my fridge, the lines ran through the freezer tray. Not the end of the world, it just changes the thermostat control; how fast and how cold it gets.

Long story short, look for a model with a flat bottom inside that fits the 1/2 sanke.

Hope this helps,

Hodges



All times are GMT. The time now is 10:50 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.