Happy HolidaySs Giveaway - Winners Re-Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > keezer collar height
Reply
 
LinkBack Thread Tools
Old 10-02-2008, 12:47 PM   #1
balto charlie
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
balto charlie's Avatar
Recipes 
 
Join Date: Nov 2005
Location: Md
Posts: 826
Liked 9 Times on 7 Posts

Default keezer collar height

Hey folks: I am finally building the collar for my keezer. I was going to use 1X4s or 2X4s. I didn't want a difficult lift for the kegs. I took off the rear hinges , measured them and realized that I will not be able to refasten to the keezer. I will be able to screw into the wood w/ the top screws but the lower screws are too low for the wood and too high for the original holes. I could use 6" or 8" collar but prefer to keep it low. I know it will be hard to clean and pick up stuff from the bottom when a collar gets too tall. How do you extend the hinges to fit a 4" collar??? Would 2X2's work or are they too narrow for the shanks.
Thanks, Charlie

__________________
Drinking Brown ale, Evil Twin Strong Ale,
Conditioning: Evil Twin Strong Ale, Belgian Dubbel
Secondary APA
Primary
On Deck ESB, IPA, Arrogant Bastard Clone
balto charlie is offline
 
Reply With Quote Quick reply to this message
Old 10-02-2008, 01:20 PM   #2
EvilTOJ
Feedback Score: 0 reviews
 
EvilTOJ's Avatar
Recipes 
 
Join Date: Dec 2005
Location: Portland, OR, Oregon
Posts: 6,465
Liked 37 Times on 29 Posts
Likes Given: 3

Default

If you don't see yourself putting the lid back into the original place on the freezer, you could always use liquid nails to adhere the hinges to the 2x4. Or just drill another hole in the hinge so it attaches to the wood.

__________________

There is a very fine line between "hobby" and "mental illness."

EvilTOJ is offline
 
Reply With Quote Quick reply to this message
Old 10-03-2008, 06:01 PM   #3
balto charlie
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
balto charlie's Avatar
Recipes 
 
Join Date: Nov 2005
Location: Md
Posts: 826
Liked 9 Times on 7 Posts

Default

I don't want to use glue. I guess I can always attach to the lid, leave hinge attached to the back and attach to the wood. Does this make sense?

__________________
Drinking Brown ale, Evil Twin Strong Ale,
Conditioning: Evil Twin Strong Ale, Belgian Dubbel
Secondary APA
Primary
On Deck ESB, IPA, Arrogant Bastard Clone
balto charlie is offline
 
Reply With Quote Quick reply to this message
Old 10-03-2008, 06:10 PM   #4
BigKahuna
Senior Member
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
BigKahuna's Avatar
Recipes 
 
Join Date: Feb 2008
Location: Eastern Colorado
Posts: 5,940
Liked 48 Times on 41 Posts
Likes Given: 6

Default

use plain old silicone caulk.
It'll peel right off of the plastic in the freezer if the time ever comes.

I would speak in opposition to the 2x8 collar. It ends up so high that you have a hard time getting kegs in without bashing anything.

__________________
Seriously. I'm here for BEER
It's Not The Size Of Your Rig That Counts....It's How Often You Use It.
BigKahuna is offline
 
Reply With Quote Quick reply to this message
Old 10-03-2008, 06:19 PM   #5
STAD
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2008
Location: San Jose, California
Posts: 658
Liked 2 Times on 2 Posts
Likes Given: 3

Default

A lot of people here tend to attach the collar to the lid claiming that it can support the extra weight of the wood. That way you don't have to worry about lifting anything over an 8" addition. Also, you can leave the hinges in the predrilled holes and just drill new holes for the other spots in the wood.

__________________
Primary: EdWort's Haus Pale Ale
Bottled:
Kegged:
Up next: Peanut Butter Porter
STAD is offline
 
Reply With Quote Quick reply to this message
Old 10-03-2008, 07:55 PM   #6
balto charlie
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
balto charlie's Avatar
Recipes 
 
Join Date: Nov 2005
Location: Md
Posts: 826
Liked 9 Times on 7 Posts

Default

I'll use caulk for sure. I guess i'll attach to the lid and use the same holes. I also guess people attached 1x6 or 1x8s to the base and not 1x4s. This way you can attach the entire hinge to the wood. Thanks folks, Charlie

__________________
Drinking Brown ale, Evil Twin Strong Ale,
Conditioning: Evil Twin Strong Ale, Belgian Dubbel
Secondary APA
Primary
On Deck ESB, IPA, Arrogant Bastard Clone
balto charlie is offline
 
Reply With Quote Quick reply to this message
Old 10-03-2008, 08:48 PM   #7
homebrewer_99
Feedback Score: 0 reviews
 
homebrewer_99's Avatar
Recipes 
 
Join Date: Feb 2005
Location: Atkinson (near the Quad Cities), IL
Posts: 17,951
Liked 89 Times on 77 Posts
Likes Given: 1

Default

Quote:
Originally Posted by BigKahuna View Post
...I would speak in opposition to the 2x8 collar. It ends up so high that you have a hard time getting kegs in without bashing anything.
One word...Step stool...OK, 2...
__________________
HB Bill
homebrewer_99 is offline
 
Reply With Quote Quick reply to this message
Old 10-03-2008, 08:55 PM   #8
BigKahuna
Senior Member
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
BigKahuna's Avatar
Recipes 
 
Join Date: Feb 2008
Location: Eastern Colorado
Posts: 5,940
Liked 48 Times on 41 Posts
Likes Given: 6

Default

Quote:
Originally Posted by homebrewer_99 View Post
One word...Step stool...OK, 2...
325# + Step Stool + Full Keg = CRASH!
__________________
Seriously. I'm here for BEER
It's Not The Size Of Your Rig That Counts....It's How Often You Use It.
BigKahuna is offline
 
Reply With Quote Quick reply to this message
Old 10-03-2008, 09:28 PM   #9
GilaMinumBeer
In yo' garage, steelin' yo parts.
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
GilaMinumBeer's Avatar
Recipes 
 
Join Date: Jan 2008
Location: Oblivion
Posts: 48,818
Liked 4947 Times on 4516 Posts
Likes Given: 60

Default

I found some non-nominal cedar at Lowes. That is, instead of it curing to the half inch nominal dimensions it was actually at th full inch. I forgoit what the actual dimensions were. I want to say 3 Inches.

Maybe I just got lucky but, it just so happened that the bottom slots of the hinge lined up p[erfectly with the top row of original holes in the freezer.

It would make for some pretty thin covereage at the shanks but, you could also look at "trailer studs". IIRC, the nominal dimension are 2x3 and actual are 1-1/2 x 2-1/2

__________________
GilaMinumBeer is offline
 
Reply With Quote Quick reply to this message
Old 10-03-2008, 10:49 PM   #10
gonzo brewer
Feedback Score: 0 reviews
 
gonzo brewer's Avatar
Recipes 
 
Join Date: Jun 2007
Location: Santa Clarita, CA
Posts: 260
Liked 1 Times on 1 Posts

Default

I used a 2x4 collar and had the same problem. The bottom screw holes of the hinge were abot 1" higher than the top threaded holes on the frezzer unit. I used 16 ga sheet metal and tek screws to attach to hinge. Then screwed in original cap screws thru the sheet metal into original top hole.

A good moment connection with no damage to the freezer.

__________________
Primary:Black Friday Pale
Secondary:
Bottled: Founder's Breakfast Stout, Preto Branco (Black Orchard clone)
Kegged:Brown, WCIPA, orange cascade, Amber, Vanilla Porter
On Deck: APA, RyeIPA, Kolsch
gonzo brewer is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keezer Collar the Coastarine Way Coastarine Kegerators and Keezers 81 07-12-2012 05:25 AM
Keezer and collar Alemental Equipment/Sanitation 8 03-14-2011 06:57 AM
Keezer Project - Add a Collar maxbing Kegerators and Keezers 5 02-17-2009 03:35 PM
Keezer collar thickness bushump Bottling/Kegging 5 02-03-2009 09:48 PM
Keezer collar. Bender Bottling/Kegging 4 12-23-2008 06:02 AM



Newest Threads

LATEST SPONSOR DEALS