Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Kegerators and Keezers (http://www.homebrewtalk.com/f252/)
-   -   Keezer Build starting this week (http://www.homebrewtalk.com/f252/keezer-build-starting-week-265525/)

bigpapa7272 09-03-2011 07:37 PM

3 Attachment(s)

Ok Here you go


bigpapa7272 09-03-2011 07:37 PM

3 Attachment(s)

Ok Here you go


bigpapa7272 09-03-2011 07:37 PM

3 Attachment(s)

Ok Here you go


bigpapa7272 10-01-2011 02:03 AM

5 Attachment(s)

Alrighty Im back with some pics, I took apart the lid today, I cant believe they did all that wiring for a stupid little light. took out worn out handle. too off the lock for which which there was no key.

Anyways the gaskets were shot and the plastic on the underside of the lid was so brittle it cracked easily, insultation was a little suspect so im off to the Home depot to get some foam board insulation for the lid

Was wondering what I should do about the excess electrical wire that ran all the way up to the lid

Should i undo the splitters and put a new electrical cord on it or just take the cord that was running to the lid zip tiie it up and let it sit on the bottom opening where the compressor is?


bigpapa7272 10-01-2011 02:03 AM

5 Attachment(s)

Alrighty Im back with some pics, I took apart the lid today, I cant believe they did all that wiring for a stupid little light. took out worn out handle. too off the lock for which which there was no key.

Anyways the gaskets were shot and the plastic on the underside of the lid was so brittle it cracked easily, insultation was a little suspect so im off to the Home depot to get some foam board insulation for the lid

Was wondering what I should do about the excess electrical wire that ran all the way up to the lid

Should i undo the splitters and put a new electrical cord on it or just take the cord that was running to the lid zip tiie it up and let it sit on the bottom opening where the compressor is?


bigpapa7272 10-01-2011 02:03 AM

5 Attachment(s)

Alrighty Im back with some pics, I took apart the lid today, I cant believe they did all that wiring for a stupid little light. took out worn out handle. too off the lock for which which there was no key.

Anyways the gaskets were shot and the plastic on the underside of the lid was so brittle it cracked easily, insultation was a little suspect so im off to the Home depot to get some foam board insulation for the lid

Was wondering what I should do about the excess electrical wire that ran all the way up to the lid

Should i undo the splitters and put a new electrical cord on it or just take the cord that was running to the lid zip tiie it up and let it sit on the bottom opening where the compressor is?


bigpapa7272 10-01-2011 02:03 AM

5 Attachment(s)

Alrighty Im back with some pics, I took apart the lid today, I cant believe they did all that wiring for a stupid little light. took out worn out handle. too off the lock for which which there was no key.

Anyways the gaskets were shot and the plastic on the underside of the lid was so brittle it cracked easily, insultation was a little suspect so im off to the Home depot to get some foam board insulation for the lid

Was wondering what I should do about the excess electrical wire that ran all the way up to the lid

Should i undo the splitters and put a new electrical cord on it or just take the cord that was running to the lid zip tiie it up and let it sit on the bottom opening where the compressor is?


bigpapa7272 10-01-2011 02:03 AM

5 Attachment(s)

Alrighty Im back with some pics, I took apart the lid today, I cant believe they did all that wiring for a stupid little light. took out worn out handle. too off the lock for which which there was no key.

Anyways the gaskets were shot and the plastic on the underside of the lid was so brittle it cracked easily, insultation was a little suspect so im off to the Home depot to get some foam board insulation for the lid

Was wondering what I should do about the excess electrical wire that ran all the way up to the lid

Should i undo the splitters and put a new electrical cord on it or just take the cord that was running to the lid zip tiie it up and let it sit on the bottom opening where the compressor is?


bigpapa7272 10-26-2011 04:25 AM

5 Attachment(s)

Heres the Pics


bigpapa7272 10-26-2011 04:25 AM

5 Attachment(s)

Heres the Pics



All times are GMT. The time now is 09:03 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.