Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > The Green Keezer
Reply
 
LinkBack Thread Tools
Old 05-11-2013, 08:15 PM   #21
Rivenin
Feedback Score: 1 reviews
Recipes 
 
Join Date: Dec 2010
Location: Portland, Oregon
Posts: 2,681
Liked 187 Times on 152 Posts
Likes Given: 116

Default

looking good!
as for the pump sitch....
can't you get a cooler and basically keep a reservoir in there along with a reservoir in the keezer? but wait. then you would have a suction issue... hrm... don't they make an inline pump?

__________________
RAINYDAY BREWING AND WINERY Southeast Portland, OR - EST 2010
Primary Rye Stout - Malt Liquor - Two Hearted/Dead Ringer - Sticke Alt
Kegged Robust Porter - Hop Bursted Saison
Coming up
Electric 120v Brutus 20
Rivenin is offline
 
Reply With Quote Quick reply to this message
Old 06-08-2013, 12:55 AM   #22
dback2004
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2013
Posts: 16
Liked 1 Times on 1 Posts

Default

After doing a little investigating, the pump I have is a submersible/inline, just had to remove the mesh cover to expose the intake threads. That of course required another special order from Grainger for adapters to my coolant lines. In the meantime I've just been pouring out the first warm/foamy half pint but I'm working on getting it all rigged up tonight. I'm currently having a little problem getting the thing primed at the moment, so taking a break to enjoy a frosty mug while I ponder the engineering involved!

__________________
dback2004 is offline
 
Reply With Quote Quick reply to this message
Old 08-27-2013, 05:15 AM   #23
dback2004
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2013
Posts: 16
Liked 1 Times on 1 Posts

Default

With some help of good friends (who like free beer) we finally polished off that half barrel of Lite a few weeks ago with pouring out the first half pint of each evening.

Tonight I went back to work on the cooling line issues. I had nonstop problems with the 2000GPH pump. Even though it had intake threads, it would overheat when run non-submersed. And since it was running outside the Keezer, it had issues pumping the coolant in the right direction. It would pump fine from outside straight up the lines and back down into the copper coil, but not in the opposite direction.

After a few hours of research on the laws of fluid mechanics, I discovered that my original 550GPH pond pump that didn't overheat the bucket of coolant had enough lift for the cooling line, I just had failed to properly prime that line (the pump wasn't strong enough to prime it for me!). I got it all working tonight, and will test the temperature tomorrow.

Two new kegs are on order at my local liquor store for pickup later this week. Another 1/4 barrel of Lite and a 1/6 barrel of Sam Adams Octoberfest... just in time for football season!

__________________
dback2004 is offline
 
Reply With Quote Quick reply to this message
Old 09-22-2013, 12:53 AM   #24
dback2004
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2013
Posts: 16
Liked 1 Times on 1 Posts

Default Dual Taps!

My 1/6 barrel of Sam Adams Octoberfest came in today!



A few weeks ago I called several distributors in my area I learned that my favorite domestic Miller Lite only comes in full sankey 1/2 barrels or pony 1/4 barrels - no slim quarters or 1/6ths. $120 and 2 days later my package from Brewstuff.com arrived with two corneys and the necessary taps. After watching a video on YouTube about how to transfer beer from a commercial keg to a corny and 20 minutes of waiting, the remaining Miller Lite was successfully moved from the Pony to the Corny.



I moved the coolant from the trash can I had been using into a Homer's Bucket from Home Depot and put both kegs in. Cleaned all the lines for good measure and turned on the gas.



I have decided I need a different Miller Lite handle, it looks a little awkward. Last month I replaced the cheap Kegco faucets that came with the kegerator conversion kit with much nicer Perlick 525SS Stainless Steel Beer Faucets. These actually pour properly when opened! The Kegcos would only pour (and then badly) if the faucet was exactly 1/2 way open. Once fully open it would bind up and stop pouring.

Next steps are to buy and install a drain under the faucets (easy, it will just drain into the dirt under the deck) and build a protective box to keep the tower clean from the elements.

But for now, I'm going to pour a cold one (or two)!

__________________
dback2004 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
The keezer build is finally finished! Keezer porn attached. GRHunter Kegerators and Keezers 21 08-31-2014 02:16 AM
Jersh's Keezer build... Keezer thread #1,493,829 Jersh Kegerators and Keezers 40 05-22-2014 01:19 PM
Terrapin So fresh & so green, green hop whitehause General Beer Discussion 6 12-05-2012 03:32 PM
Why? Fan in the Keezer? Temp Comntroller in the Keezer? DPBISME Kegerators and Keezers 28 08-25-2012 06:06 AM
Green Beer? Well its not green, well mabe it is CobraAgent Beginners Beer Brewing Forum 12 05-12-2009 09:59 PM



Newest Threads

LATEST SPONSOR DEALS