Happy HolidaySs Giveaway - Winners Re-Re-Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > Draft System Access Control
Reply
 
LinkBack Thread Tools
Old 03-20-2013, 02:05 PM   #1
rpierce
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Posts: 3
Default Draft System Access Control

I set up a 2 tap draft system at a hackerspace that has its own homebrew club. We have a full size fridge, and an air cooled insulated supply and return line to the bar's draft tower. There's enough room to expand to 4 taps. Unfortunately, we're victims of our own success. Anything we brew and put on tap gets guzzled in short order, and we'd like to ration how much gets put out for free public consumption.

We're also a bunch of electronics geeks that like to over-engineer anything we can get our hands on. The idea: Use a Raspberry Pi to control access to the draft system, with a display to show what beers are on tap, and what taps are operational vs. what taps are off limits. Then, have some kind of electrically actuated valves to lock each of the beverage lines.

I'm using 1/4" beverage hose. Has anyone done anything like this? My two concerns:

1. I have heard that a lot of these kinds of valves have small orifices and will cause the beer to foam in the line.

2. The valves themselves will be in the refridgerator. I've seen 24V normally closed solenoid valves, but these take a lot of power. For events, we may want all taps open, and if they're all energized, the solenoids will put out a lot of heat into the fridge. I'm instead thinking about something that has a motor or servo actuator, where opening or closing it takes electricity but leaving it in the open or closed position doesn't.

Any help would be greatly appreciated.

__________________
rpierce is offline
 
Reply With Quote Quick reply to this message
Old 03-20-2013, 07:18 PM   #2
jay3712
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: Greenville, SC
Posts: 6
Liked 1 Times on 1 Posts

Default

Sounds like you are looking for something like the Kegbot.

You can add sensors to calculate how much has left each keg, as well as a RFID reader with solenoids so you can control access.

I got rid of my keezer last year when I moved but I am considering this for the next one...

__________________
jay3712 is offline
 
Reply With Quote Quick reply to this message
Old 03-21-2013, 02:33 AM   #3
Thegreatestgray
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2013
Location: Running Springs, California
Posts: 144
Liked 5 Times on 5 Posts

Default

Instead of putting the valves on the beer line why not put them on the co2 lines to the kegs

__________________
Thegreatestgray is offline
 
Reply With Quote Quick reply to this message
Old 03-21-2013, 02:51 AM   #4
AllanMar
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2008
Location: Canada
Posts: 191
Liked 5 Times on 5 Posts

Default

Quote:
Originally Posted by Thegreatestgray View Post
Instead of putting the valves on the beer line why not put them on the co2 lines to the kegs
There will still be enough pressure on the keg to dispense beer and if someone does that and uses up the CO2 in the keg, the beer will go flat until it comes back on.

I did this while in school with my first kegerator, and you can make it work, but the solenoid valves are a pain to get foam-free. I ditched the valves, but the flow meters are nice to have.
__________________
AllanMar is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tap a draft system BrokenKnucklesBrewery Bottling/Kegging 2 07-13-2012 07:29 PM
tap a draft system brockettbrews Beginners Beer Brewing Forum 4 04-07-2012 04:54 PM
TAP draft system Lsrc11 Beginners Beer Brewing Forum 15 03-19-2011 04:12 PM
For Sale - TAP-A-DRAFT System RichBenn For Sale 8 05-19-2010 01:47 AM
Has anyone use the TAP A DRAFT System texaviator23 Bottling/Kegging 0 04-15-2006 07:47 PM



Newest Threads

LATEST SPONSOR DEALS