Happy HolidaySs Giveaway - Winners Re-Re-Re-Re-Drawn - 24 hours to Claim!

Get your HBT Growlers, Shirts and Membership before the Rush!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > Basic Keezer Build
Reply
 
LinkBack Thread Tools
Old 06-28-2012, 02:50 PM   #1
ljacobs
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Fayetteville, GA
Posts: 6
Liked 2 Times on 1 Posts

Default Basic Keezer Build

I built my first keezer a few weeks ago and am just now getting around to posting pictures. I didn't do a very good job of documenting the progress but if anyone has any questions I will do my best to fill in any blanks.

keezer1.jpg

I don't have the picture of what it looked like before, but I was able to score a 14.8 cu ft. freezer off of Craigslist for $100. It barely fit in my SUV and unloading it solo was a chore to say the least! Here is what it looked like after I pressure washed it, dried it and primed it for the layer of chalkboard paint I planned to use.

keezer-2.jpeg

I didn't get a photo of the underside prior to ripping it out. However, the plastic was a little cracked and warped and the insulation looked extremely old so I decided to replace it. Here is what it looked like after I ripped all of it out and pressure washed the hood.

keezer-5.jpeg

Here is what it looked like after 2 coats of chalkboard paint. I didn't bother to paint the back in chalkboard paint as I don't really plan on having the back openly exposed at any point in time. I had to move this from outside to inside overnight and then back outside the next morning to coat the second time. I was able to find a small dolly at Harbor Freight and Tools for about $15 that I could just load it on to and maneuver around the house and driveway.

keezer-4.jpg

I have never messed with deep freezers at all, so these hinges had me worried, after doing some searching on HBT as well as google, I found some pictures that showed how to get around the tension hinges.

__________________
ljacobs is offline
 
Reply With Quote Quick reply to this message
Old 06-28-2012, 03:01 PM   #2
ljacobs
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Fayetteville, GA
Posts: 6
Liked 2 Times on 1 Posts

Default

Here is where I really slacked on taking pictures. It was around 12am on a Friday when I decided to build the collar and with my limited woodworking skills it was rather frustrating to say the least. However, an hour or two later I had a fully functional collar that worked. I used a 7.5 inch spade bit to drill out the holes for the taps prior to connecting the collar. There is also a good amount of weather stripping below the collar.

keezer-6.jpeg

Below is underneath the hood. I still need to insulate around the collar, but surprisingly it has held temp and not required a ton of energy from the freezer. You can see on the lid where I replaced the insulation. There is about 3/4 in to 1 inch of foam insulation there. I only have 2 taps hooked up at the moment as I am waiting on my IPA and Blueberry Wheat to get to a keggable state. (note - this picture was taken today, this project was actually finished about 2 weeks ago)

keezer-7.1.jpg


There is a ton of room in this thing. Here it shows 4 cornys easily fitting and the 10# Co2 tank in the bottom corner. I have pint glasses and bottles chilling on the hump that is not included in the picture. (note - this was also taken today)

keezer-7.2.jpg

I decided after the initial collar pictures that I wanted to stain the wood, so the following day I picked up some stain and put 2 coats on the collar.

keezer-7.jpeg

And below is the finished product. Easy labeling below the taps and I am using the top as a calendar of sorts to keep track of fermentation, kegging and tapping schedules. I tapped the blonde yesterday and it is dispensing right at 38 degrees and tastes awesome. I haven't built too many things, so I was quite happy with myself when I finished this project!

keezer-8.jpeg


__________________
ljacobs is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
The keezer build is finally finished! Keezer porn attached. GRHunter Kegerators and Keezers 21 08-31-2014 02:16 AM
Basic Keezer Build brubrew Kegerators and Keezers 18 06-11-2012 03:41 AM
Very basic keezer build question deadboy Kegerators and Keezers 14 04-12-2012 02:34 PM
Single Tier Basic build BenS Brew Stands 2 09-24-2010 02:40 PM
Keezer - Basic Question tgrier Kegerators and Keezers 10 05-14-2008 03:16 PM



Newest Threads

LATEST SPONSOR DEALS