Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Kegerators and Keezers (http://www.homebrewtalk.com/f252/)
-   -   4 Tap Keezer (http://www.homebrewtalk.com/f252/4-tap-keezer-471030/)

Mudaynemike 04-17-2014 09:32 PM

4 Tap Keezer
 
6 Attachment(s)

Hey y'all. I made a 4 tap keezer from an old chest freezer. Went with a simple 2x4 collar because it was deep enough for the kegs and CO2. After that I used 3/4 inch foam insulation to retain temp and AC taped to whole thing. It has a 4-way CO2 manifold and a fan to help circulate the air and avoid mold. Let me know what you think and if I can answer any questions. (Other mods: Johnson temp controller, kegco 4 in. Tap shank combo from amazon, "The Governor" co2 reg from NB., finally hose are hooker up by 1/4 in. swivel barb)Attachment 193917Attachment 193918Attachment 193919Attachment 193920Attachment 193921Attachment 193922


Sent from my iPhone using Home Brew


Mudaynemike 04-17-2014 09:32 PM

4 Tap Keezer
 
6 Attachment(s)

Hey y'all. I made a 4 tap keezer from an old chest freezer. Went with a simple 2x4 collar because it was deep enough for the kegs and CO2. After that I used 3/4 inch foam insulation to retain temp and AC taped to whole thing. It has a 4-way CO2 manifold and a fan to help circulate the air and avoid mold. Let me know what you think and if I can answer any questions. (Other mods: Johnson temp controller, kegco 4 in. Tap shank combo from amazon, "The Governor" co2 reg from NB., finally hose are hooker up by 1/4 in. swivel barb)Attachment 193917Attachment 193918Attachment 193919Attachment 193920Attachment 193921Attachment 193922


Sent from my iPhone using Home Brew


Mudaynemike 04-17-2014 09:32 PM

4 Tap Keezer
 
6 Attachment(s)

Hey y'all. I made a 4 tap keezer from an old chest freezer. Went with a simple 2x4 collar because it was deep enough for the kegs and CO2. After that I used 3/4 inch foam insulation to retain temp and AC taped to whole thing. It has a 4-way CO2 manifold and a fan to help circulate the air and avoid mold. Let me know what you think and if I can answer any questions. (Other mods: Johnson temp controller, kegco 4 in. Tap shank combo from amazon, "The Governor" co2 reg from NB., finally hose are hooker up by 1/4 in. swivel barb)Attachment 193917Attachment 193918Attachment 193919Attachment 193920Attachment 193921Attachment 193922


Sent from my iPhone using Home Brew


Mudaynemike 04-17-2014 09:32 PM

4 Tap Keezer
 
6 Attachment(s)

Hey y'all. I made a 4 tap keezer from an old chest freezer. Went with a simple 2x4 collar because it was deep enough for the kegs and CO2. After that I used 3/4 inch foam insulation to retain temp and AC taped to whole thing. It has a 4-way CO2 manifold and a fan to help circulate the air and avoid mold. Let me know what you think and if I can answer any questions. (Other mods: Johnson temp controller, kegco 4 in. Tap shank combo from amazon, "The Governor" co2 reg from NB., finally hose are hooker up by 1/4 in. swivel barb)Attachment 193917Attachment 193918Attachment 193919Attachment 193920Attachment 193921Attachment 193922


Sent from my iPhone using Home Brew


Mudaynemike 04-17-2014 09:32 PM

4 Tap Keezer
 
6 Attachment(s)

Hey y'all. I made a 4 tap keezer from an old chest freezer. Went with a simple 2x4 collar because it was deep enough for the kegs and CO2. After that I used 3/4 inch foam insulation to retain temp and AC taped to whole thing. It has a 4-way CO2 manifold and a fan to help circulate the air and avoid mold. Let me know what you think and if I can answer any questions. (Other mods: Johnson temp controller, kegco 4 in. Tap shank combo from amazon, "The Governor" co2 reg from NB., finally hose are hooker up by 1/4 in. swivel barb)Attachment 193917Attachment 193918Attachment 193919Attachment 193920Attachment 193921Attachment 193922


Sent from my iPhone using Home Brew


Mudaynemike 04-17-2014 09:32 PM

4 Tap Keezer
 
6 Attachment(s)

Hey y'all. I made a 4 tap keezer from an old chest freezer. Went with a simple 2x4 collar because it was deep enough for the kegs and CO2. After that I used 3/4 inch foam insulation to retain temp and AC taped to whole thing. It has a 4-way CO2 manifold and a fan to help circulate the air and avoid mold. Let me know what you think and if I can answer any questions. (Other mods: Johnson temp controller, kegco 4 in. Tap shank combo from amazon, "The Governor" co2 reg from NB., finally hose are hooker up by 1/4 in. swivel barb)Attachment 193917Attachment 193918Attachment 193919Attachment 193920Attachment 193921Attachment 193922


Sent from my iPhone using Home Brew


Mudaynemike 04-18-2014 07:39 AM

1 Attachment(s)

Fan mountedAttachment 194050


Sent from my iPhone using Home Brew



All times are GMT. The time now is 02:36 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.