Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Automated Brewing Forum (http://www.homebrewtalk.com/f235/)
-   -   Sbuoncri's Automagic Brewery Plan (http://www.homebrewtalk.com/f235/sbuoncris-automagic-brewery-plan-377335/)

sbuoncri 12-30-2012 05:07 PM

Sbuoncri's Automagic Brewery Plan
 
I'm very new to all of this but I've drawn up a very simple 3 vessel automated system based on JonW's rig. His design is really simple and clean. Mine would be electric.

http://www.homebrewtalk.com/f51/sing...ed-rig-204705/

The systems I've seen seem to use way more valves so I feel like I'm missing something. The drawing below would use three 3-way stainless valves and one H20 valve. I'm drawn towards using a BCS-460 because of simplicity and ability to monitor it from my iphone.

Thoughts?

http://i778.photobucket.com/albums/y...ry/Brewery.png

A few ideas that I would like to implement but I haven't seen it used in someone's system:

1. Sight Glass Level Sensors - 1 per vessel
http://www.stedham.com/sightglass.htm

2. Liquid/Flow sensors - to protect pumps/elements from running dry. Or stuck sparge sensing? Not completely sure what the abilities are of this sensor.
http://www.stedham.com/flowswitches.htm

morticus 12-30-2012 05:24 PM

Looks cool to me. I'm currently building a tweaked version of the Brutus 10. Just finished welding up my stand yesterday. I like your sight glass sensor idea, I've seen that on another brew rig on YouTube. As far as the flow sensors go I personally wouldn't use them it's just adds another element to break or malfunction, plus if you use a magnetic pump such as the march pump you can run those dry without damaging them. Good luck on your build

Happy Brew Year

crane 12-30-2012 05:39 PM

I don't believe the BCS has general purpose analog inputs to be used for flow or volume sensors. If you want to go that route I think your only options are brewtroller or build your own controller.

I think you are going to want to add valves to adjust the flow for each pump.

sbuoncri 12-31-2012 04:24 AM

Quote:

Originally Posted by crane (Post 4728846)
I don't believe the BCS has general purpose analog inputs to be used for flow or volume sensors. If you want to go that route I think your only options are brewtroller or build your own controller.

I think you are going to want to add valves to adjust the flow for each pump.

I think your right about the sensor for flow sensors but the other is a capacitive sensor that fits your sight glass and looks like it can activate at a target volume. Anyone able to confirm that with bcs?

crane 12-31-2012 02:31 PM

Quote:

Originally Posted by sbuoncri

I think your right about the sensor for flow sensors but the other is a capacitive sensor that fits your sight glass and looks like it can activate at a target volume. Anyone able to confirm that with bcs?

$100 a pop just to be able to sense a single volume. Ouch. You are correct that it has only a on/off digital output. I don't see how sensing a single volume will be of much use. Unless every beer you brew has the same amount of grain your HLT and MLT volumes are going to change.


All times are GMT. The time now is 11:37 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.