Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > Automated Brewing Forum > electronic valves
Reply
 
LinkBack Thread Tools
Old 06-18-2012, 12:56 PM   #1
hepkat701
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Plainfield, Illinois
Posts: 63
Liked 7 Times on 5 Posts
Likes Given: 1

Default electronic valves

Ok putting together my first rig. It will be a HERMS system that I plan on fully automating. Four vessels keggle hlt, 5 gallon heat exchanger, keggle mash tun and keggle bk. All hard plumed all run off 1 pump. Hlt and bk gas fired and heat exchanger electric 220. Obviously lots of electronic valves involved, anyone have suggestions on where to source the valves?

__________________
hepkat701 is offline
 
Reply With Quote Quick reply to this message
Old 06-18-2012, 01:21 PM   #2
sohara
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Montreal, Quebec
Posts: 36
Liked 2 Times on 2 Posts

Default

They have motorized ball valves at http://www.oscsys.com/ (the commercial site run by the contributors to the brewtroller project). They are stainless and look pretty nice. $50 a pop. They seem to be out of stock but that might just be because the owners are currently at NHC. I think you can also order these from China in quantity but I think the shipping times are longer.

__________________
sohara is offline
 
Reply With Quote Quick reply to this message
Old 06-18-2012, 01:52 PM   #3
Rbeckett
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Rbeckett's Avatar
Recipes 
 
Join Date: Dec 2011
Location: Bronson, Fl
Posts: 987
Liked 66 Times on 47 Posts
Likes Given: 29

Default

Ya might wanna contact member "Squeeky" he has a connection to some very nice ball valves that are electrically controlled. he will also have a lot of the answers to how to plumb them in and write the proper control code for a chip. Definately worth talking to him before you decide. Hope this helps get you going in the direction your interested in.
Wheelchair Bob

__________________

What do you mean "no Kidneys"???, WTF now I gotta drink less beer...
Join the Automation sub forum in Electric brewing for a discussion of components and control systems. I did!!!!

Rbeckett is offline
 
Reply With Quote Quick reply to this message
Old 06-18-2012, 04:52 PM   #4
carlisle_bob
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Carlisle, PA
Posts: 1,205
Liked 27 Times on 26 Posts

Default

Hi

Based on a post elsewhere, Squeaky is more or less waiting for 30 pieces to be needed before he places his next order.

Bob

__________________
carlisle_bob is offline
 
Reply With Quote Quick reply to this message
Old 06-18-2012, 07:11 PM   #5
Squeeky
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2005
Location: Dayton, Ohio
Posts: 513
Liked 17 Times on 15 Posts
Likes Given: 3

Default

Wow I feel so loved

Thanks for the recommendation guys, carlisle bob is correct about needing 30 claimed before I'd order again. It's not worth it economically to have them come from China unless I order 50; as it's well over $200 in shipping. At that I make roughly $6 a valve for my time and effort, not trying to hide anything. Plus the fund of wiring 2k+ to China, and hoping everything come correctly without extra fees etc.

There have been several members asking, but no one really ready to buy yet. (Emjay, pull the trigger on the 20 you want and I'll get the order placed this week)

Rbeckett it correct, I'm here to help. HBT has done so much for my brewing, I just want to repay the favor. If you have any questions just PM.

Squeeky

__________________
Squeeky is offline
 
Reply With Quote Quick reply to this message
Old 06-19-2012, 12:30 AM   #6
carlisle_bob
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Carlisle, PA
Posts: 1,205
Liked 27 Times on 26 Posts

Default

Hi

Ok, I'll ask .... how much are the valves?

Bob

__________________
carlisle_bob is offline
 
Reply With Quote Quick reply to this message
Old 06-19-2012, 01:23 AM   #7
Squeeky
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2005
Location: Dayton, Ohio
Posts: 513
Liked 17 Times on 15 Posts
Likes Given: 3

Default

The extras I had went for $42 a piece or $40 if ordering more then 5. They would be the same cost if I ordered another 50, assuming factory prices didn't go up, however I don't know why the would.

OSCSYS sells for $50, but I know he offers a discount if ordering 5+ and 10+, I think the cheapest they go through him is $44 when ordering 10+. Although JC is out right now, he will likely have them in 2 weeks after getting back from NHC.

I'm not a vendor so I can't really buy for resale within the classifieds, and the profit isn't enough to pay for vendor status. So shhhh just PM if you need valves in the future

__________________
Squeeky is offline
 
Reply With Quote Quick reply to this message
Old 06-19-2012, 12:44 PM   #8
hepkat701
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Plainfield, Illinois
Posts: 63
Liked 7 Times on 5 Posts
Likes Given: 1

Default

Thanks everyone! Hope to start on my rig soon.

__________________
hepkat701 is offline
 
Reply With Quote Quick reply to this message
Old 06-23-2012, 08:11 PM   #9
psbuckland
Feedback Score: 2 reviews
Recipes 
 
Join Date: Feb 2011
Location: Frederick, MD
Posts: 189
Liked 3 Times on 3 Posts

Default

Just buy them from OSCSYS. They stand by their products.

__________________
My Fully Automated All-Electric Brewtroller System
psbuckland is offline
 
Reply With Quote Quick reply to this message
Old 06-24-2012, 01:16 PM   #10
carlisle_bob
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Carlisle, PA
Posts: 1,205
Liked 27 Times on 26 Posts

Default

Quote:
Originally Posted by psbuckland View Post
Just buy them from OSCSYS. They stand by their products.
Hi

Classic choice - save some money or get an 800 number for support.

Bob
__________________
carlisle_bob is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools