Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Automated Brewing Forum (http://www.homebrewtalk.com/f235/)
-   -   Diagram for single vessel recirc? (http://www.homebrewtalk.com/f235/diagram-single-vessel-recirc-364585/)

blakelyc 10-31-2012 03:51 AM

Diagram for single vessel recirc?
 
Hi folks: I have decided to build a single-vessel recirc rig. Does anyone out there have a flow or wiring diagram they could share? I'm trying to keep with my gas burner, and figuring out the recirculating inlet/outlet positions is tricky. Since I am sure this has been done before, perhaps someone out there has some info to share.

I have searched around and found the majority of systems to be electric. I an trying to stick with gas just because that's what I currently have.

Definitely looking at brewtroller control and parts from ocsys. Was thinking arduino, but I design software for a living and I'd rather not deal with learning yet another whole platform.

I am also going at this with no real intention to clone another system, so I hope to gather as many viewpoints and options as I can to help me make the best decisions.

Thanks in advance!
-Blake

motorhead69 11-08-2012 03:29 AM

1 Attachment(s)
I'm looking to do the same thing. Here is what I've come up with so far. Hopefully someone else will chime in.

From what I understand you'll want the PID to be able to run in manual mode.

blakelyc 11-08-2012 08:58 PM

Hi Motorhead:

That's pretty much where I'm starting as well. How are you intending to rig the pilot burner? I was thinking about the honeywell Q314A4586 pilot burner if I could figure a convenient way to connect it to the burner stand.

I'm also thinking about the PID... either Brewtroller or using an arduino, I haven't yet decided.

Even if no one chimes in, perhaps we can sort this out between the two of us!

-b

motorhead69 11-09-2012 11:13 PM

I was thinking of mounting mine similar to the one shown in this thread since I have the same type of burner. http://www.homebrewtalk.com/f51/yet-another-help-burner-question-244770/


All times are GMT. The time now is 09:10 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.