Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Electric Brewing > Upgrading my Panel
Reply
 
LinkBack Thread Tools
Old 01-15-2012, 08:40 PM   #1
Thundercougarfalconbird
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2010
Location: , GA
Posts: 783
Liked 22 Times on 18 Posts
Likes Given: 26

Default Upgrading my Panel

So I have a very simple 120v single PID, single probe controller. I have 2 1650w ultra low density elements in 2 kettles as well as a 1500w heat stick. I would like to incorporate a RIMS tube into my setup but I'm out of outlets. SOOO...

I'm looking to consolidate my system for as cheap as possible. I think a good first step would be to upgrade the elements (or atleast the BK element) so I can toss that dangerous heat stick. I figure I'll need a second PID and probe for the RIMS. I'm also thinking 3000w elements in the kettles would be ideal(as I don't plan to go any larger than 5 gallon batches). And I assume the RIMS will be using a 1500w element. I have access to a 60A 250V 3 prong outlet. Most of the RIMS diagrams have seen are geared towards 10gallon+ batches. I need counseling =P

__________________

The best beer I ever made was the next one I brew.

Thundercougarfalconbird is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
What guage wire from main panel to spa panel? AdamCanFly Electric Brewing 22 02-01-2012 02:36 AM
Mounting spa panel guts in control panel kevink Electric Brewing 7 08-20-2011 02:31 AM
How big is your panel? Utmustang Electric Brewing 21 08-07-2011 12:16 AM
Spa panel sagnew440 Electric Brewing 1 05-03-2011 08:33 PM
panel to spa panel wiring buffalobrewer Electric Brewing 4 11-28-2010 11:06 PM