Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Electric Brewing (http://www.homebrewtalk.com/f170/)
-   -   Troubleshooting help (http://www.homebrewtalk.com/f170/troubleshooting-help-365264/)

tunaboatbeer 11-03-2012 08:34 PM

1 Attachment(s)

Nope, element was never dry fired. I had read all the warnings about that and was sure not to. The element itself still looks brand new. No discoloring or visible damage.


tunaboatbeer 11-06-2012 01:31 PM

1 Attachment(s)

Here is a pic of the SSR. It came from kegkits and didn't include a manual. I have the power going in to 1 and 2 goes to the element.


tunaboatbeer 11-07-2012 03:29 AM

1 Attachment(s)

Here is the best pic I could take. I know my wiring is a little sloppy. Hope it helps


tunaboatbeer 11-07-2012 12:56 PM

2 Attachment(s)

Here is a pic of the SSR wiring and the diagram I used. The PID is getting power from the white power wire. The black power wire runs thru the SSR. The PID is a CXTG-3000. It's rated for 100 VAC to 240 VAC. The diagram is for a slightly different PID terminal configuration. Thanks again guys for all the help. I really appreciate it!


tunaboatbeer 11-07-2012 12:56 PM

2 Attachment(s)

Here is a pic of the SSR wiring and the diagram I used. The PID is getting power from the white power wire. The black power wire runs thru the SSR. The PID is a CXTG-3000. It's rated for 100 VAC to 240 VAC. The diagram is for a slightly different PID terminal configuration. Thanks again guys for all the help. I really appreciate it!


tunaboatbeer 11-07-2012 02:27 PM

1 Attachment(s)

right the PID terminals in the diagram are not the same as the actual PID. Here is the diagram from the PID manual. 1 and 2 are power. 6 and 7 are SSR. 7, 8 and 9 are RTD probe. Sorry for all the confusion


tunaboatbeer 11-09-2012 12:22 PM

1 Attachment(s)

here is the panel. Sorry it's a little blurry. The brewery breaker is the bottom left. It is a true 2 pole, not a tandem. It's "double wide" like the other large breakers


tunaboatbeer 11-09-2012 01:10 PM

1 Attachment(s)

This is the only other picture I have on my phone.



All times are GMT. The time now is 02:43 AM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.