P-J

Recipes 

You did good and are right on the money with your understanding of the diagram.

P-J

TJTHEBEST

Recipes 

Thanks PJ!!

Do you think i could get a copy of that handy Brew parts order spreadsheet that ive seen floating around? I dont want to forget anything that i may need.

P-J

Recipes 

Do you mean this one?
(It is not configured for your set up.)

Click on the image to see the actual spread sheet.

--- Then save it to your system. The Excel file is not password protected so that you can add things that interest you. You can use the tab key (and back tab key) to navigate the sheet.




I Sure Hope This Helps You!

P-J

TJTHEBEST

Recipes 

Yup that's it thanks.

TJTHEBEST

Recipes 

So with this configuration will the switch for the PID turn the Timer and the PID on? Or will the Timer be on the as long as the panel is plugged in?

TJTHEBEST

Recipes 

Also here is how im planning on laying out my control panel.

Any comments/concerns/suggestions would be greatly appreciated.

renevdb

Recipes 

Did you look at the Auber PID with timer? http://www.auberins.com/index.php?main_page=product_info&cPath=1&products_ id=239

__________________
Eddie would go

Primary: Strong Belgium Blonde

Bottle: Abdij II, Wit, Cool Vienna, Dad's Dubbel

P-J

Recipes 

The way it's setup, the timer is on when the panel is plugged in.

I can change that for you if you want. (I suggest - Yes.)

Just let me know.
-----------

Nevermind.. I made a new diagram for you anyway (different name):

As always, click on the image for a full scale diagram printable on Tabloid paper (11" x 17")



P-J

(BTW - I discovered that I made a wiring error in the previous version. I fixed it now so if you have saved it you might want to refresh it to the version now up in this thread.)

Olive Drab

Recipes 

what are you using as the control panel housing? The first order of parts arrived and the PID is longer than I expected so I need to locate new housing. Im building the same rig as this diagram to hold me over until Im ready to go do the 3 vessel system.

TJTHEBEST

Recipes 

Thanks PJ!! You are always so darn helpful!

Olive Drab, I have a 12X12X6 NEMA box that i am planning to use. Though i might buy a project box from auberins. How deep is the is the one you have?