Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Electric Brewing > Temp Probe Placement?
Reply
 
LinkBack Thread Tools
Old 08-11-2012, 03:47 PM   #1
Broham1
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Location: Vancouver, WA
Posts: 269
Liked 29 Times on 23 Posts

Default Temp Probe Placement?

I'm getting my kegs cut, punched, and welded this week, so I can actually start realizing my plan of going electric! Here comes the string of questions!

I'm planning a single PID, single pump, single tier, three keggle HERMS system. It's a scaled-down Kal setup, basically.

This question is about where to place the probe. During recirculation, I know I want to be measuring the wort at the HEX output.

So, how do I track the strike water?

My thoughts are to put the probe in a tee with camlock fittings, that way one probe can be shared between the HLT, the HERMS, and the CFC output for chill control.

Anyone done this already or have other ideas?

__________________
Broham1 is offline
 
Reply With Quote Quick reply to this message
Old 08-11-2012, 04:04 PM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
Vendor Ads 
Feedback Score: 2 reviews
 
Bobby_M's Avatar
Recipes 
 
Join Date: Aug 2006
Location: Whitehouse Station, NJ
Posts: 22,004
Liked 967 Times on 647 Posts
Likes Given: 28

Default

One pump, single tier. You will be batch sparging then.

You can make the portable flow though probe to move from job to job like you said or you can also recirculate your strike though the herms. Either way will get the pid the info. The cool thing about making the probe portable is that you can put it on the output of your plate chiller to digitally monitor temporary temp.

__________________
BrewHardware.com
Sightglass, Refractometer, Ball Valve, Weldless bulkhead, Thermometer, Decals, Stainless Steel Fittings, Compression Fittings, Camlock Quick Disconnects, Scale, RIMS tube, Plate Chiller, Chugger Pump, Super Clear Silicone Tubing, and more!

New Stuff?
Bobby_M is online now
 
Reply With Quote Quick reply to this message
Old 08-11-2012, 04:10 PM   #3
shroomzofdoom
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2009
Location: Piscataway, NJ
Posts: 609
Liked 11 Times on 11 Posts
Likes Given: 6

Default

image-1355099036.jpg

I built this so I could do that, it's for a BCS, but with a simple 5vdc signal wire and a connection (I use RCA jacks) you could easily do this. Save on fittings and probes! I connect this to the output of my MT, chiller, etc.
__________________
Mike D

My electric BCS-460 build (work in progress)

Coffin cooling lessons
shroomzofdoom is offline
 
Reply With Quote Quick reply to this message
Old 08-13-2012, 02:43 AM   #4
Broham1
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Location: Vancouver, WA
Posts: 269
Liked 29 Times on 23 Posts

Default

Thanks for the replies. Good to hear I'm on the right path.

Never thought of running the strike through the HERMS. Nice!

I'll be doing the portable probe, though, since I want to read the output from my CFC, too.

__________________
Broham1 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools