Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Electric Brewing > Switchable hybrid 110v/240v system possible?

Reply
 
LinkBack Thread Tools
Old 07-09-2011, 02:14 PM   #11
thelorax121
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Athens GA
Posts: 419
Liked 1 Times on 1 Posts
Likes Given: 1

Default

Just to chime in, I have essentially modified my system to do about what you are talking about. I have two power inlets for my system right now, a 3-wire 240V and a 120V, and a 5500W lwd element in a RIMS tube. My idea was to use the rims as 240V after my water filer to preheat my mash and sparge water, then flip a switch to reduce the voltage to 120V reducing it to 1375W and use it as a normal rims. I also have a heatstick with a 5500W ULWD element, so I can brew full electric if I have access to 240V, or I can brew with the help of propane at 120V, using the rims element just to keep mash temps and pre-heat water a bit to save as much gas as possible (a $20 propane refill every 4 brew is what got me into E-brewing in the first place, those high pressure burners are monsters!). You can see the discussion on how best to wire the switch for changing the element from 240 to 120 here:

http://www.homebrewtalk.com/f170/swi...v-240v-244260/

__________________
thelorax121 is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
1 PID for 2 110v elements mr_tripp Electric Brewing 6 05-06-2011 03:08 AM
Help with wiring 110v Control Panel Will319 Electric Brewing 1 04-21-2011 02:51 AM
240V adapter cord? ExHempKnight Electric Brewing 16 02-24-2011 12:33 AM
Strange issue with 240v legs. 120v on both, no 240v Brewmoor Electric Brewing 5 12-03-2010 06:15 PM
One 220v or two 110v? goybar Electric Brewing 5 10-12-2010 06:30 PM