Happy HolidaySs Giveaway - Last Sponsor Giveaway of the Year!

Come Enter the BrewDeals/FastFerment Giveaway!


Home Brew Forums > Home Brewing Beer > Electric Brewing > swapping RTD sensors?
Reply
 
LinkBack Thread Tools
Old 12-05-2012, 07:51 PM   #1
RyanW
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Grand Rapids, MI
Posts: 8
Default swapping RTD sensors?

I'm thinking about using two different RTD sensors, one in my RIMS tube to monitor the mash them then another in an instrument T to monitor chill temp. Is it possible to swap the cord using the same PID, or do they need to be calibrated?

__________________
RyanW is offline
 
Reply With Quote Quick reply to this message
Old 12-05-2012, 08:47 PM   #2
BadNewsBrewery
Basement Brewer
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
BadNewsBrewery's Avatar
Recipes 
 
Join Date: Oct 2012
Location: Severn, MD
Posts: 1,146
Liked 116 Times on 95 Posts
Likes Given: 55

Default

The PID 'learns' the profile of the vessel the RTD is in. If you switch back and forth on the same PID it will never learn the system and you'll never hit temps as well as you would without swapping. But it can be done.

__________________
Building a Bad News Brewery - eHERMS

2014:
5gal Scottish Wee Heavy
5gal Saison
15gal American Pale Ale
20gal Belgian Wit
10gal Oktoberfest
10gal Southern Pecan Ale

Keg 1: Apfelwein
Keg 2: Oktoberfest
Keg 3: Southern Pecan

On Deck: Winter Spice Ale
BadNewsBrewery is online now
 
Reply With Quote Quick reply to this message
Old 12-05-2012, 09:10 PM   #3
RyanW
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2009
Location: Grand Rapids, MI
Posts: 8
Default

I plan on using the PID to control mash temp, but only using the PID to display the temp while chilling. Learning the system wouldn't be an issue.

My biggest concern is will the temp read the same if I swap sensors?

__________________
RyanW is offline
 
Reply With Quote Quick reply to this message
Old 12-05-2012, 09:21 PM   #4
jCOSbrew
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Colorado Springs, CO
Posts: 617
Liked 38 Times on 34 Posts
Likes Given: 7

Default

The PID should allow you to specify a temp offset to calibrate the temp and account for the sensor cabling and internal circuitry. I think the two RTDs probes will be closer if they have the same cable length.

You can probably calibrate for the mash sensor and +/- a degree is not critical for the chill temp

__________________
jCOSbrew is offline
 
Reply With Quote Quick reply to this message
Old 12-05-2012, 09:27 PM   #5
OMJ
Feedback Score: 1 reviews
Recipes 
 
Join Date: May 2009
Location: Camp Hill, PA
Posts: 582
Liked 18 Times on 13 Posts
Likes Given: 4

Default

if the 2 sensors read different for the same thing then just note the difference and set the offset for the Mash rtd. Then when you are chilling just know you have to add or subract X number of degrees for the actual temp.

__________________
OMJ is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
RTD Sensors bgarino Electric Brewing 11 03-04-2013 02:31 PM
For Sale - RTD Sensors louie0202 For Sale 2 01-20-2012 07:24 PM
Red Fish Sensors USB temp sensors?? tannnick Brew Stands 1 02-16-2010 11:57 PM



Newest Threads

LATEST SPONSOR DEALS