Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Electric Brewing > Show us your element housings/pots. How did you do it?
Reply
 
LinkBack Thread Tools
Old 01-08-2014, 09:48 PM   #231
renthispace
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Bay Area
Posts: 74
Liked 3 Times on 3 Posts
Likes Given: 4

Default

My element enclosure was inspried by Bobbie's new enclosure except I sandwiched a welding spud with the lid of a stainless steel kitchen shaker with silver solder. See my build linked in my sign for more details.


Silver soldered the ground lug


This turned out to be too much wire. I didn't account for the ground wire taking up space inside the can when I wound the wire (there is about 4' of each color). In the end there is only about 2' of each color within the can (except the ground).


The final product with the connectors pushed into the switchcraft plug (that was a pain).


Just before it was screwed on (I put a reverse torque on the wires before screwing them in so they would relax when tightened).


And complete

renthispace is offline
 
Reply With Quote Quick reply to this message
Old 01-09-2014, 03:53 AM   #232
Flomaster
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: Orange, Ca
Posts: 2,140
Liked 32 Times on 30 Posts
Likes Given: 37

Default

Still Dragon setup I'll likely be upgrading that strain relief or painting it black. I just need one more for my boil pot.

I debated over this one or Bobby's from brewhardware.com and in the end in happier with this one. I have the Brewhardware rims tube with element enclosure and the Still Dragon is hands down nicer and beefier. It's also 2" instead of 1-1/2" I barely fit that ripple element in the 2" enclosure.



Sent from my HTC One using Home Brew mobile app

1389242920357.jpg  
Flomaster is offline
 
Reply With Quote Quick reply to this message
Old 01-10-2014, 02:42 PM   #233
augiedoggy
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2013
Location: North Tonawanda NY
Posts: 774
Liked 63 Times on 56 Posts
Likes Given: 35

Default

Cheap waterproof and effective as others have stated... just used a 1 1/4" electrical coupler filled with harbor freight epoxy. For now I save my "bling" for the beer...
Later I may want something a little more impressive looking for me and the brew friends.... ( have yet to befriend anyone locally in the hobby but one person who brews with gas in his shed an hour away) Right now I'm spending were its more important though.
I do wish I had put the switch craft connectors close to the kettles as the longer cords are a pain when carrying my boil kettle over to the bathroom to clean it. ( brewing in a spare bedroom - no basement)

img_20140108_084807.jpg  
__________________
augiedoggy is offline
 
Reply With Quote Quick reply to this message
Old 01-20-2014, 07:44 PM   #234
MX1
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
MX1's Avatar
Recipes 
 
Join Date: May 2008
Location: Colorado Springs, CO
Posts: 932
Liked 44 Times on 36 Posts
Likes Given: 71

Default

Quote:
Originally Posted by renthispace View Post
My element enclosure was inspried by Bobbie's new enclosure except I sandwiched a welding spud with the lid of a stainless steel kitchen shaker with silver solder. See my build linked in my sign for more details.


Silver soldered the ground lug


This turned out to be too much wire. I didn't account for the ground wire taking up space inside the can when I wound the wire (there is about 4' of each color). In the end there is only about 2' of each color within the can (except the ground).


The final product with the connectors pushed into the switchcraft plug (that was a pain).


Just before it was screwed on (I put a reverse torque on the wires before screwing them in so they would relax when tightened).


And complete
I LIKE THIS!!!

Did you just the lid that came with it, with all the holes and stuff?

Tim
__________________

"The ART of brewing Beer, is the ACT of brewing Beer"

Ferm 1: Bitter End IPA
Ferm 2: Coffee Stout

On Deck: Colorado Common Cream Ale

Keg 1: House Amber Ale
Keg 2:

Total Gallons brewed (2014) - 30

MX1 is offline
 
Reply With Quote Quick reply to this message
Old 01-21-2014, 06:50 AM   #235
MrSaLTy
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
MrSaLTy's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Chicago, IL
Posts: 429
Liked 8 Times on 6 Posts

Default

I used Still dragon element guard kits. Really like how they turned out. Here are some pictures.

Build thread here - http://www.homebrewtalk.com/f51/my-e...rewery-421059/








__________________
PRIMARY: Air
SECONDARY#1: Air
SECONDARY#2: Air
On Tap: Air
Keg Conditioning: Air
Bottle stock:
Next Up: dunno yet
--------------------
My Homebrew Stirplate
My eHERMS and home brewery build
MrSaLTy is offline
ryanhope Likes This 
Reply With Quote Quick reply to this message
Old 01-21-2014, 12:25 PM   #236
Moby
I need more gadgets....
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: North Carolina
Posts: 143
Default

That looks pretty great! Who did your welding on the Blichmann?

__________________
Moby is offline
 
Reply With Quote Quick reply to this message
Old 01-21-2014, 12:38 PM   #237
passedpawn
Waste Allocation Load Lifter - Earth Class
HBT_MODERATOR.png
Feedback Score: 0 reviews
 
passedpawn's Avatar
Recipes 
 
Join Date: Apr 2009
Location: ☼ Clearwater, FL ☼
Posts: 18,878
Liked 3307 Times on 2059 Posts
Likes Given: 2825

Default

Still Dragon housing here. Another member here welded the TC ferrule to the keggle. I removed the too-small plastic strain releif that came with it, widened the hole, and used a large SS PG21 gland. Works great. Nice to be able to remove the ripple element so easily for cleaning.

__________________
Hey goomba I love how you dance the rumba
But take some advice paisano learn-a how to mambo
If you're gonna be a square you ain't-a gonna go anywhere.
passedpawn is offline
 
Reply With Quote Quick reply to this message
Old 01-21-2014, 05:38 PM   #238
MrSaLTy
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
MrSaLTy's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Chicago, IL
Posts: 429
Liked 8 Times on 6 Posts

Default

Quote:
Originally Posted by Moby View Post
That looks pretty great! Who did your welding on the Blichmann?
The welding was done by a fellow HBTer named Colebeer78 who is located not too far from me here in the Chicago south burbs. He did a great job at a reasonable price I think.
__________________
PRIMARY: Air
SECONDARY#1: Air
SECONDARY#2: Air
On Tap: Air
Keg Conditioning: Air
Bottle stock:
Next Up: dunno yet
--------------------
My Homebrew Stirplate
My eHERMS and home brewery build
MrSaLTy is offline
 
Reply With Quote Quick reply to this message
Old 01-21-2014, 10:25 PM   #239
renthispace
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Bay Area
Posts: 74
Liked 3 Times on 3 Posts
Likes Given: 4

Default

Quote:
Originally Posted by MX1 View Post
I LIKE THIS!!!

Did you just the lid that came with it, with all the holes and stuff?

Tim
Yes I did. If you check out my build in my signature I have pictures of me putting it together before I soldered the whole thing.
__________________
My E-BIAB(ish) Build: Reverse Braumeister - 5 or 10 gal Batches
renthispace is offline
 
Reply With Quote Quick reply to this message
Old 01-21-2014, 11:52 PM   #240
Strecker25
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Rochester, NY
Posts: 197
Liked 5 Times on 3 Posts
Likes Given: 1

Default

imageuploadedbyhome-brew1390351906.645288.jpg
imageuploadedbyhome-brew1390351927.994322.jpg
Enclosures by bobby, they're the weldless version with camco ripple elements. Perfectly waterproof the first time. Awesome product.
__________________
Strecker25 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
What does your element look like? dboblitt Electric Brewing 4 01-10-2012 03:08 PM
Element Install in a 1/2 Keg LiverDance Electric Brewing 7 12-05-2010 04:36 PM
208 volt element Budzu Electric Brewing 14 11-06-2010 02:19 AM
Where did you get your heating element? CircleC-Brewer Electric Brewing 20 10-29-2010 02:26 PM
Did I just ruin my element? dboblitt Electric Brewing 3 10-11-2010 06:02 PM