Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > Electric Brewing > Running 240v for Future Brewery
Reply
 
LinkBack Thread Tools
Old 11-22-2012, 02:25 AM   #11
Antler
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2011
Location: Carbonear, Nl
Posts: 710
Liked 19 Times on 17 Posts

Default

Quote:
Originally Posted by Antler

Gotcha, won't be moving the system, so GFCI breaker I'd prefer. Hope to get this wiring done soon, so i can drywall the basement. Ill wire up the outlet and run the cable myself. An electrician friend will look it over and tie it all into my panel.

Thanks for the fast replies everybody I really appreciate it.
So I need a 60 amp GFCI breaker, 25' of #6 AWG cable, and a 240v outlet rated for 60amps, correct?
__________________
Antler is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2012, 02:45 AM   #12
porcupine73
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2012
Location: Fort Meade
Posts: 811
Liked 46 Times on 42 Posts
Likes Given: 513

Default

Probably going to want an outlet that carries the neutral so a 4 conductor outlet, that way you have 120VAC available for the pumps and such. If you get the cable at Home Depot or similar they usually list the amperes its good for, because if for some silly reason it has only 60C insulation it might not actually be good for 60A by code. Or could double check with your electrician friend to make sure there isn't some funky local code.

Cable would be 4/c or 3/c w/ gnd.

__________________
porcupine73 is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2012, 03:40 PM   #13
whoaru99
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2012
Posts: 1,591
Liked 124 Times on 101 Posts
Likes Given: 16

Default

Quote:
Originally Posted by porcupine73 View Post
...If you get the cable at Home Depot or similar they usually list the amperes its good for, because if for some silly reason it has only 60C insulation it might not actually be good for 60A by code. ...
To expound further, the whole circuit and all connections must be considered in the OCP/ampacity. Ampacity is limited to the weakest link.

IOW, doesn't matter if the wire is rated 75A @ 90C if the weakest link is a termination rated at 60C. Then only the 60C ampacity rating would apply to the entire circuit.
__________________

Primary: Pre-prohibition Lager
Secondary: Russian Imperial Stout
Drinking: Chinook IPA
Drinking: Waldo Lake Amber
Drinking: Edwort's Apfelwein

whoaru99 is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2012, 03:45 PM   #14
porcupine73
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2012
Location: Fort Meade
Posts: 811
Liked 46 Times on 42 Posts
Likes Given: 513

Default

That's true, I'm just going with 75C because all the modern breakers I see for home panels usually say 60C/75C. Older breakers I imagine there are probably lots rated only for 60C.

__________________
porcupine73 is offline
 
Reply With Quote Quick reply to this message
Old 11-22-2012, 03:49 PM   #15
whoaru99
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2012
Posts: 1,591
Liked 124 Times on 101 Posts
Likes Given: 16

Default

Yeah, didn't mean to imply you were wrong or anything...and I don't know what's all out there for ratings on new and old things. Was just hoping to build upon what you started, reinforcing there is more to the story than just what the wire size is.

__________________

Primary: Pre-prohibition Lager
Secondary: Russian Imperial Stout
Drinking: Chinook IPA
Drinking: Waldo Lake Amber
Drinking: Edwort's Apfelwein

whoaru99 is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
240V 30A HLT and BK with 120V 20A RIMS running BCS-460 Tom_FL Electric Brewing 13 10-14-2013 04:56 PM
Back to the Future brewery name ArrogantDusty General Chit Chat 39 11-05-2012 01:22 PM
Switch for running element at 120v OR 240V? thelorax121 Electric Brewing 14 05-10-2011 11:37 PM
Brewery Up and Running alowell DIY Projects 7 03-24-2011 11:24 PM
Help with Future Brewery Name nibiyabi Label Display & Discussion 10 02-19-2009 12:20 AM