The Great Bottle Opener Giveaway

Home Brew Forums > Home Brewing Beer > Electric Brewing > RTV High Temperature Silicone to Seal Heat Element Connections

Reply
 
LinkBack Thread Tools
Old 05-17-2013, 12:44 PM   #1
sleewok
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Posts: 20
Likes Given: 14

Default RTV High Temperature Silicone to Seal Heat Element Connections

I'm 99% sure this will work, but I want to double check. Most people seem to be using JB Weld to seal the power connections to their heating element. I was planning on fitting PVC right around the connections and then filling it will the silicone.

Would it be easier/just as effective to use a high temp RTV silicone to seal the electrical connection?

I was thinking the benefit of this would be that if there was ever a leak I could cut away the silicone and reseal it. I could also use the silicone for a wider variety of jobs.

This is the silicone I am considering:

http://www.amazon.com/Momentive-Tran...e+silicone+fda

Thanks!

__________________
sleewok is offline
 
Reply With Quote Quick reply to this message
Old 05-17-2013, 06:29 PM   #2
microbusbrewery
Senior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
microbusbrewery's Avatar
Recipes 
 
Join Date: Jan 2011
Location: West Jordan, UT
Posts: 1,093
Liked 86 Times on 66 Posts
Likes Given: 42

Default

Should work but have you considered the Blichmann-style setup? If you haven't seen it, here's a link to Kal's site where he details the parts and assembly. I used this style setup on the elements on my standalone HEX and HLT. They work awesome and I'd think they're more easily serviced than encasing your connections in silicone.

__________________
http://www.microbusbrewery.org/
microbusbrewery is offline
 
Reply With Quote Quick reply to this message
Old 05-19-2013, 10:07 PM   #3
sleewok
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Posts: 20
Likes Given: 14

Default

Quote:
Originally Posted by microbusbrewery View Post
Should work but have you considered the Blichmann-style setup? If you haven't seen it, here's a link to Kal's site where he details the parts and assembly. I used this style setup on the elements on my standalone HEX and HLT. They work awesome and I'd think they're more easily serviced than encasing your connections in silicone.
Thanks for the response. I'm not sure if I've seen the setup you're referring to. Did you forget the link?
__________________
sleewok is offline
 
Reply With Quote Quick reply to this message
Old 05-19-2013, 10:26 PM   #4
brewmcq
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
brewmcq's Avatar
Recipes 
 
Join Date: Apr 2011
Location: Houlton, ME
Posts: 1,717
Liked 460 Times on 318 Posts
Likes Given: 2507

Default

http://theelectricbrewery.com/
__________________
Brew McQ | Welcome to my Pub | Brew McQ on Facebook | Northern Maine Home Brewers on Facebook | Untappd

What do YOU want out of this hobby? It's your hobby. Do it the way YOU want to do it. Don't depend on the rest of us to tell you how to do it.
brewmcq is offline
 
Reply With Quote Quick reply to this message
Old 05-19-2013, 10:46 PM   #5
microbusbrewery
Senior Member
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
microbusbrewery's Avatar
Recipes 
 
Join Date: Jan 2011
Location: West Jordan, UT
Posts: 1,093
Liked 86 Times on 66 Posts
Likes Given: 42

Default

Quote:
Originally Posted by sleewok View Post
Thanks for the response. I'm not sure if I've seen the setup you're referring to. Did you forget the link?
Cr@p, sorry about that. Thanks brewmcq for remembering the link. Here's a direct link to the heating element portion.

http://www.theelectricbrewery.com/heating-elements
__________________
http://www.microbusbrewery.org/
microbusbrewery is offline
brewmcq Likes This 
Reply With Quote Quick reply to this message
Old 05-20-2013, 02:41 AM   #6
sleewok
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2013
Posts: 20
Likes Given: 14

Default

Quote:
Originally Posted by microbusbrewery View Post
Cr@p, sorry about that. Thanks brewmcq for remembering the link. Here's a direct link to the heating element portion.

http://www.theelectricbrewery.com/heating-elements
Heh, no worries (double thanks brewmcq). I do appreciate the link. I'm familiar with the setup you are talking about. The more I think about it .... I'm leaning towards a box now. I just didn't want to use the JB Weld (In case I ever want to remove the box). I'll probably do a box with the high temp silicone (seal from outside and inside).

I did a test boil with everything exposed (a couple days ago). Either way I go will be safer than that!
__________________
sleewok is offline
 
Reply With Quote Quick reply to this message
Old 05-20-2013, 03:02 AM   #7
ThreeDogsNE
Good for what ales you
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2008
Location: , Southwest Iowa
Posts: 587
Liked 21 Times on 17 Posts
Likes Given: 30

Default

I used White Lightning Silicone Rubber RTV formula for my heatsticks a few years ago. The silicone is now pretty much wort colored, not clear, but it continues to seal well. I couldn't find it locally recently, so I used Dap 08641. I found that at an Ace hardware. Non of the local big box stores hand anything suitable at the time.

__________________
ThreeDogsNE is offline
 
Reply With Quote Quick reply to this message
Old 05-20-2013, 01:27 PM   #8
xecutech
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2011
Location: Mt. Juliet, TN
Posts: 1
Default

You can use rtv sealant from an auto parts store.

__________________
Industrial Heating Elements
xecutech is offline
 
Reply With Quote Quick reply to this message
Old 05-20-2013, 04:24 PM   #9
jCOSbrew
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2012
Location: Colorado Springs, CO
Posts: 597
Liked 35 Times on 32 Posts
Likes Given: 7

Default

I also use a low tech element mount:
1" lock nut inside kettle, stock element gasket outside kettle and PVC cap to cover connections.

I used some silicon around the PVC cap to make it "water resistant".

When it is set the silicon encapsulated connections would be very difficult to remove. Do a leak test and a functional test before adding the extra silicon.

__________________
jCOSbrew is offline
 
Reply With Quote Quick reply to this message
Old 05-23-2013, 06:24 PM   #10
alien
Feedback Score: 1 reviews
Recipes 
 
Join Date: Apr 2012
Location: Philadelphia, PA
Posts: 1,234
Liked 64 Times on 58 Posts
Likes Given: 61

Default

Edited - misunderstood original post.

__________________
Magic Smoke brewhouse and grill

Arduino PID controller - Automatic Smoker - Cooler MLT - Counterflow Chiller - SSR demo - PWM timer - Folding Brew Table
alien is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale - WTB - Silicone O-Ring for Heating element lzrdkng14 For Sale 3 03-14-2012 02:03 PM
D'oh - Kettle Element Seal buggslife Equipment/Sanitation 2 07-14-2011 04:03 PM
Heat Element vs Heat Stick + Questions on heating sparge jdlev Electric Brewing 13 06-04-2011 06:08 AM
Silicone vs Double Seal Buna-N? EFaden Bottling/Kegging 6 12-13-2010 10:57 AM
my take on covering the heating element connections Broncobum Electric Brewing 30 11-05-2010 06:25 PM