Ss Brewing Technologies Giveaway!

Home Brew Forums > Home Brewing Beer > Electric Brewing > RIMS Dip tube question
Reply
 
LinkBack Thread Tools
Old 02-02-2014, 06:57 PM   #11
KramE
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2012
Location: Providence, RI
Posts: 96
Liked 3 Times on 3 Posts
Likes Given: 5

Default

Quote:
Originally Posted by Bobby_M View Post
Any of mine that are labeled 5/8" will have an ID of 9/16 and the bore of the compression fittings are 14mm which is also about 9/16". I need to change the text on the site about hand tightening. When we were using silicone orings as the ferrules, hand tight was fine. We converted over to nylon ferrules and you do need to tighten 1/4 turn more than hand tight. On the other hand, you also don't have to replace the orings so often.
I figured that out yesterday when brewing.

By the way, I had a great brew day, much in part to all of your products. Cam locks, tubing, RIMS, dip tube, etc etc.

Thank you for your awesome products and service!

Sent from my SCH-I545 using Home Brew mobile app
KramE is offline
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Question e-herms with a rims style tube for HEX moclamd DIY Projects 2 10-24-2013 03:17 PM
RIMS Tube Sparge Out Question sch21c All Grain & Partial Mash Brewing 3 09-09-2013 04:44 PM
Question about PID and RIMS Tube. sethhobrin Electric Brewing 10 03-18-2012 12:42 AM
RIMS Tube question... Dgonza9 DIY Projects 6 03-02-2011 06:22 PM
Question for those of you who have the Brewer's Equip RIMS Tube limulus Equipment/Sanitation 5 09-29-2010 11:57 PM