HBT 2015 Big Giveaway - Enter Now

Huge Supporting Membership Discounts - 20% Off

Home Brew Forums > Home Brewing Beer > Electric Brewing > Question on heating elements
LinkBack Thread Tools
Old 07-06-2011, 04:09 AM   #1
Feedback Score: 0 reviews
Join Date: Jan 2008
Location: Cincinnati, Ohio
Posts: 163
Default Question on heating elements

I recently completed an electric brewing rig similar to Kal's setup. It has a 240v setup with the 5500 ulwd heating element in my 15 g kettle. I use this to mainly make 5 and 10 g batches. I would like to make small 3 gal test batches though and have an extra kettle available to convert for this. I want to use the same power source and setup that I currently have. I have a 240v cord and plug to plug into the control panel but thought getting the same 5500w element would be big overkill. Can I use a 120w 1500 or 2000w element and still wire it up through the 240v capable control panel? I figured that the element would only draw the needed power and it would be fine but wanted to make sure. I thought maybe changing to smaller power cord and still using the plug I bought to connect to the control panel. This is the plug I have:

Leviton 2621 30 Amp, 250 Volt, NEMA L6-30P, 2P, 3W, Locking Plug, Industrial Grade, Grounding - Black-White

Thanks for any advice!

ddknight is offline
Reply With Quote Quick reply to this message

Quick Reply
Thread Tools

Newest Threads