Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Electric Brewing > Photos of the new 5500 watt electric system

Reply
 
LinkBack Thread Tools
Old 06-11-2011, 06:03 PM   #1
GRHunter
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Michigan
Posts: 586
Liked 7 Times on 7 Posts

Default Photos of the new 5500 watt electric system

After a couple of months of studying and planning, and then 2 weeks of build time, I am finally finished with my little system. I have to give thanks to Kal for taking the time to document the process so well that even us newbies can get into electric brewing. Also to P-J who provided lots of advice and invaluable schematics.

When I first started I thought this project was going be cheap, quick, and easy. I was wrong on all accounts. But to be fair, because of my ignorance and lack of patience I made it a lot more expensive, slower, and harder. With the lessons learned from this build I expect it to go a lot better next time. Now that I can get back to brewing again I am going to take my time and build a 3 kettle single controller system. AKA the Electric Brewery. I am probably just going to order the kit from Kal as chasing down all the parts was my least favorite part of the build.

And as I mentioned before, I think I may have set the record for the most expensive single kettle electric brew system ever. I tracked every penny I spent on this project except for gas (picking up parts) and my time. I spent a lot of extra money for the following reasons:

A) I bought locally because I didn't want to wait
B) I bought online from a single vendor because I was too lazy to place multiple orders
C) I bought the wrong parts
D) I bought to many items because I didn't know the correct quantity
E) I had to pay an electrician to install my sub-panel
F) I had almost none of the tools I needed

Here is a break down of my costs by category

Cost Description
$228.46 Tools
$97.84 Element Parts
$365.42 Controller Parts
$24.97 Tax
$47.00 Shipping & Handling
$560.00 Electrician

$1,323.69 Total

eb01.jpg   eb02.jpg   eb03.jpg   eb06.jpg   eb07.jpg  

__________________
Brewing beer is a fun and rewarding hobby. When you do good, you get beer. When you do bad, you get beer.
It's a lot like recreation league softball.
GRHunter is offline
 
Reply With Quote Quick reply to this message
Old 06-11-2011, 09:20 PM   #2
P-J
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Charlotte, NC
Posts: 3,231
Liked 244 Times on 196 Posts
Likes Given: 430

Default

Very nicely done. Congrats!

The good part? You now have the tools for a lot of other projects. You have your sub panel in place which allows you to do whatever you choose on your next adventure.
And the best part? You have an electric brew rig that looks absolutely great and will serve you very well.

I'm pleased that I could be of some help.

P-J

__________________
P-J is offline
 
Reply With Quote Quick reply to this message
Old 06-11-2011, 11:23 PM   #3
jsguitar
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
jsguitar's Avatar
Recipes 
 
Join Date: May 2011
Location: Overland Park, KS
Posts: 1,017
Liked 92 Times on 71 Posts
Likes Given: 411

Default

Looks awesome!

I'm embarking on the same adventure. You're right that it's more expensive than you first think. For example, I went to Home Depot the other day to buy some sjoow wire. I had my toddler with me who was amused with the various switches for a while, but by the time I got to buying the wire he was ready to go so I forgot that I wanted 20 feet of 10/3 and 10 feet of 10/4 and I had the guy cut me 30 feet of 10/4! Of course, I didn't even realize my mistake until later that night. Oh, well. I figured out I can now put my controller in a more optimum place....for an extra $50! Live and learn.

Congrats.

__________________
jsguitar is offline
 
Reply With Quote Quick reply to this message
Old 06-12-2011, 02:53 AM   #4
Garrett
HBT_SUPPORTER.png
Feedback Score: 4 reviews
 
Garrett's Avatar
Recipes 
 
Join Date: Jan 2011
Location: Huntington Beach, CA
Posts: 255
Liked 13 Times on 13 Posts
Likes Given: 17

Default

looks great! I am currently doing the exact same setup! 62qt kettle instead.

__________________
Garrett is offline
 
Reply With Quote Quick reply to this message
Old 06-12-2011, 03:04 AM   #5
Garrett
HBT_SUPPORTER.png
Feedback Score: 4 reviews
 
Garrett's Avatar
Recipes 
 
Join Date: Jan 2011
Location: Huntington Beach, CA
Posts: 255
Liked 13 Times on 13 Posts
Likes Given: 17

Default

Actually what setup did you use to do the sight glass with a ball valve? I would love to do that as well.

__________________
Garrett is offline
 
Reply With Quote Quick reply to this message
Old 06-12-2011, 03:11 AM   #6
GRHunter
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Michigan
Posts: 586
Liked 7 Times on 7 Posts

Default

Quote:
Originally Posted by Garrett View Post
Actually what setup did you use to do the sight glass with a ball valve? I would love to do that as well.
It's the kit that Bobby M sell here on the forum.
__________________
Brewing beer is a fun and rewarding hobby. When you do good, you get beer. When you do bad, you get beer.
It's a lot like recreation league softball.
GRHunter is offline
 
Reply With Quote Quick reply to this message
Old 06-12-2011, 12:08 PM   #7
kappclark
Feedback Score: 0 reviews
 
kappclark's Avatar
Recipes 
 
Join Date: Sep 2006
Location: Southern VT
Posts: 1,608
Liked 5 Times on 5 Posts
Likes Given: 4

Default

nicely done --

this is 220 - right ? It looks like 110 outlets below the sub panel. Is the GFI breaker in the sub panel, or the main box ?

__________________

Bill Clark
Windham, VT

kappclark is offline
 
Reply With Quote Quick reply to this message
Old 06-12-2011, 12:19 PM   #8
GRHunter
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2010
Location: Michigan
Posts: 586
Liked 7 Times on 7 Posts

Default

Quote:
Originally Posted by kappclark View Post
nicely done --

this is 220 - right ? It looks like 110 outlets below the sub panel. Is the GFI breaker in the sub panel, or the main box ?
Yes, it's 240v to the brew controller and 120v to the accessory plug on the side. I have a 50 amp GFCI breaker in my main panel. And then in my sub panel I have two standard breakers, a 30 amp breaker to run the brew system, and then a 20 amp breaker to the accessory plugs. I wanted the GFCI in the sub-panel but my electrician pointed out that technically my sub-panel is in a wet area and by code the GFCI should in the main panel. He also said that having GFCI to another GFCI can be a little quirky, so we went with the typical spa panel design.
__________________
Brewing beer is a fun and rewarding hobby. When you do good, you get beer. When you do bad, you get beer.
It's a lot like recreation league softball.
GRHunter is offline
 
Reply With Quote Quick reply to this message
Old 06-12-2011, 02:07 PM   #9
Dgonza9
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2010
Location: Evanston, Illinois
Posts: 1,183
Liked 9 Times on 9 Posts

Default

You can save quite a lot of money if you go with 120v and use existing outlets, if you have them, or if you move them. That's what I did. Two 2000w elements can boil 13-14 gallons for a ten gallon batch. That's enough for just about anyone these days. I used to really want 240v (I'd have to reorganize my panel), but now it's hard to see the need.







Where I most overspent in both time and money was with the illuminated switches. But oh, well. They're pretty cool. Certainly don't need 'em, but at least I can see what's on. Then again, when I turn on pump or fan I know it's on by the sound, so it is overkill. While I know part of the fun is building new things, I've finally reached a point where I don't need any more upgrades (sort of) and can just brew beer. Enjoy your new rig.

The upgrade I like the most at this point is the RIMS tube and controller. Do you have one or is your pid to control the boil?

__________________
On Tap: Belgian Barrel Aged Barleywine, Da Yooper's Oatmeal Stout, Breakfast Stout, Hop Your Face Off IIPA, Catcher in the Rye Saison, "Wino-head" Nelsin Sauvin Gumballhead.

Bourbon Barrel Duchesse De Bourgnone
Kegged:

Fermenting English Mild

on Deck: Lager?
Dgonza9 is offline
 
Reply With Quote Quick reply to this message
Old 06-12-2011, 02:13 PM   #10
kappclark
Feedback Score: 0 reviews
 
kappclark's Avatar
Recipes 
 
Join Date: Sep 2006
Location: Southern VT
Posts: 1,608
Liked 5 Times on 5 Posts
Likes Given: 4

Default

120v - are those 20 amp outlets ?

Is the HLT a cooler ?

__________________

Bill Clark
Windham, VT

kappclark is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Electric BIAB system Navy_Brewer Electric Brewing 22 07-29-2011 08:49 PM
Video Brewday on my electric system nostalgia Electric Brewing 21 05-23-2011 08:15 PM
Video tour of my 5500 watt heatstick nostalgia Electric Brewing 5 05-22-2011 05:02 PM
Brewmation Electric system? MSKBeerfan Electric Brewing 10 01-30-2011 12:01 AM
Portable electric AG system LordUlrich Electric Brewing 5 12-29-2010 03:54 AM