Electric Brewing Supply 30A BCS Giveaway!


Home Brew Forums > Home Brewing Beer > Electric Brewing > Not your typical GFCI/ground for eBrewery question
Reply
 
LinkBack Thread Tools
Old 01-10-2013, 12:15 AM   #1
kaz4121
Feedback Score: 3 reviews
Recipes 
 
Join Date: Jul 2010
Location: USA
Posts: 374
Liked 23 Times on 12 Posts
Likes Given: 3

Default Not your typical GFCI/ground for eBrewery question

Hey guys,

I have done a bunch of research on HBT for my eBrewery build. In short, I am building a custom system featuring a 11 gallon SS HLT with 5500W electric heating element, 10 gallon Igloo MLT with false bottom, 11 gallon SS BK with 5500W electric heating element and a chugger pump.

I eventually want to create my dream eBrewery like Kal's, but since I am a recent college grad paying off massive student loans, that will have to wait. In the mean time, I have budgeted and began piecing together a $1500 eBrewery system.

Now, I don't know a lick about electricity except that it is pretty easy to kill yourself, especially when you add water into the mix. I'm not building a control panel since it is too expensive at this point and because I don't feel comfortable building one by myself yet. I also am not comfortable building my own electric heating element yet. Therefore, I am purchasing (and yes overpaying) the following:

Controller: http://www.highgravitybrew.com/produ...r-306p3084.htm

Heating element:http://www.highgravitybrew.com/produ...S-306p2669.htm

Basically I am installing my heating element in the kettles, and those get plugged into the electric kettle controller, which gets plugged into the GFCI outlet.

Now my brew stand will feature a SS frame with thick plywood top. I know I should have a GFCI installed for my heating elements but here is my question:

Will accidental contact with water and the heating element successfully trip the GFCI without shocking me first (ie go from the element through the controller and to the GFCI before electrocuting me)? Or do I need to ground the heating element and electric controller separately as well? Also should my brew top be SS instead of wood?

I am interested in safety first and doing it the "right way".

__________________
THIRD LEAP BREWING CO. www.thirdleapbrew.com

Visit my website for the list of beers in progress
kaz4121 is offline
 
Reply With Quote Quick reply to this message
Old 01-10-2013, 12:35 AM   #2
jeffmeh
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
jeffmeh's Avatar
Recipes 
 
Join Date: Feb 2009
Posts: 1,851
Liked 140 Times on 121 Posts
Likes Given: 18

Default

Yes, in addition to the GFCI, everything must be properly grounded. You do not want to be the path to ground relying on a GFCI to save your life. The controller out of the box should be properly grounded. A bit more questionable is the element, as you need to make sure the chassis of the element that is attached to the ground makes sufficient contact with the kettle. You can and should test that with a multimeter. If you buy from High Gravity, I would hope that they would provide you with whatever support you need to get this right.

Good luck with it.

__________________
jeffmeh is online now
 
Reply With Quote Quick reply to this message
Reply



Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
The Broken Robot eBrewery, oh me, oh my. Chriso Electric Brewing 57 10-16-2013 06:43 PM
Went eBrewery. Looking at next steps. mavrick1903 Electric Brewing 1 10-29-2012 05:57 PM
bullfrog ale ebrewery build. captainoverspray Electric Brewing 14 10-05-2012 03:17 AM
Inline gfci post gfci breaker Squeeky Electric Brewing 2 05-24-2012 08:26 PM
GFCI 30 amp cords extinct? Question on GFCI breaker too... jdlev Electric Brewing 23 07-26-2011 01:01 AM