Home Brew Forums

Home Brew Forums (http://www.homebrewtalk.com/forum.php)
-   Electric Brewing (http://www.homebrewtalk.com/f170/)
-   -   Mypin TA4 user manual (http://www.homebrewtalk.com/f170/mypin-ta4-user-manual-345412/)

Exayu 08-03-2012 12:36 PM

Mypin TA4 user manual
 
Does anyone have a link or copy of the Mypin TA4 user manual. I lost mine and I don't remember how to change the settings :confused:. I can't find it anywhere on the web.

stlbeer 08-03-2012 01:25 PM

Oops, sorry -all I found was the how to wire it up. Have you considered contacting MyPinChina directly?

http://www.mypinchina.com/uploadfiles/201161494651265.pdf

stlbeer 08-08-2012 01:06 PM

Ok, I think this is the user guide for the TA4 - http://www.agptek.com/software/PC5-2012-latest-manual.pdf

Good luck.

dooney 10-22-2012 06:33 AM

mypin ta4 instructions
 
not sure if this is the right place for this question. I have brought a mypin ta4 pid controller but have locked the parameters to read only (010 on lck menu) and can't seem to change it back.
Does anyone know how to change the parameter lock setting back to 000?

ilovetodrinkgoodbeeroften 11-19-2012 02:47 AM

Manual for the TA4
 
Here is the manual. Was pulling hair out trying to find it. This forum comes up every google search. When I found it- I uploaded - ( MYPIN TA4 )

https://docs.google.com/open?id=0B5ffKmk8JZOwM3hBeEZzdUF5LTQ

dooney 11-21-2012 06:32 AM

thanks for this - have managed to change it back now.

Majd 05-19-2014 04:27 AM

Mypin TA4 user manual
 
3 Attachment(s)
Can some one who have had MYPIN TA4 help me and walk me through connecting my Temperature controller PID MYPIN TA4. I got this one along with a Solid State Relay (SSR) and a temperature probe that came with it has only two wires a blue and a red. The schematic diagram on the side of the PID shows much more screws and connection points than actually there. I used the attached PDF diagram to connect my probe and SSR to the PID (LOL acronyms). Also see actual pictures of my PID and SSR.



Now when I turned on the unit it did not read temperature right. Thinking that it needs some calibration, but also it is acting weird, some times it does not move up or down it stays stuck mainly when I dip it in ice water, then left the probe off, temperature stays the same and does not rise up

Any clue what is wrong? is it my connection, or setup?


All times are GMT. The time now is 10:32 PM.

Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.