Spike Brewing 12.5 Conical Fermenter Giveaway - Enter Now!

Home Brew Forums > Home Brewing Beer > Electric Brewing > My planned Ebiab keggle cheap, simple controller

Reply
 
LinkBack Thread Tools
Old 06-18-2013, 01:44 PM   #11
cliffhanger1821
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Norfolk, VA
Posts: 146
Liked 6 Times on 5 Posts
Likes Given: 9

Default

Made a little headway last night. Got the controller finished, hooked up to the element, started to piece together the stand... Today I need to install my 60a gfci and finish running cable to the shed so I can do the water test. Will post up pics soon

__________________
cliffhanger1821 is offline
 
Reply With Quote Quick reply to this message
Old 06-19-2013, 01:03 AM   #12
Swamproad
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2011
Location: Stevens Point, Wisconsin
Posts: 6
Liked 1 Times on 1 Posts

Default

I tried out my EBIAB controller like the one you proposed building on Fathers Day. The SSR/pot along with a camco 5500 watt element in my keggle worked great. Heats water real fast and is definitely faster than propane.

__________________
Swamproad is online now
 
Reply With Quote Quick reply to this message
Old 06-19-2013, 12:54 PM   #13
cliffhanger1821
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Norfolk, VA
Posts: 146
Liked 6 Times on 5 Posts
Likes Given: 9

Default

Nice! Now I know it should work for me if I ever get my 240 run.

__________________
cliffhanger1821 is offline
 
Reply With Quote Quick reply to this message
Old 06-22-2013, 12:15 PM   #14
cliffhanger1821
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Norfolk, VA
Posts: 146
Liked 6 Times on 5 Posts
Likes Given: 9

Default

I made hot water last night!

__________________
cliffhanger1821 is offline
 
Reply With Quote Quick reply to this message
Old 06-22-2013, 01:59 PM   #15
cliffhanger1821
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Norfolk, VA
Posts: 146
Liked 6 Times on 5 Posts
Likes Given: 9

Default

forumrunner_20130622_095808.jpg



forumrunner_20130622_095821.jpg



forumrunner_20130622_095849.jpg



forumrunner_20130622_095859.jpg
__________________
cliffhanger1821 is offline
 
Reply With Quote Quick reply to this message
Old 06-22-2013, 02:05 PM   #16
cliffhanger1821
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Norfolk, VA
Posts: 146
Liked 6 Times on 5 Posts
Likes Given: 9

Default

So my stand is made from some left over deck boards and scrap wood I had laying around, don't judge me! The pump recircs from the bottom, through the ccfc, and onto the top of the grain bed. I will also recirc during the boil every 10-15ish minutes so the liquid in those lines gets good and mixed in. Hopefully like this I won't have to swap hoses out at all during the entire process.

__________________
cliffhanger1821 is offline
 
Reply With Quote Quick reply to this message
Old 06-22-2013, 03:01 PM   #17
cliffhanger1821
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Norfolk, VA
Posts: 146
Liked 6 Times on 5 Posts
Likes Given: 9

Default

1 hour to boiling from ambient, 15 gallons in a non-insulated keggle. That's not to bad, right?

__________________
cliffhanger1821 is offline
 
Reply With Quote Quick reply to this message
Old 06-25-2013, 02:11 AM   #18
cliffhanger1821
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Norfolk, VA
Posts: 146
Liked 6 Times on 5 Posts
Likes Given: 9

Default

Made my first electric brew yesterday! Had a few small hiccups, but the controller worked great.

__________________
cliffhanger1821 is offline
 
Reply With Quote Quick reply to this message
Old 06-25-2013, 06:12 AM   #19
pogden
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Phoenix, Arizona
Posts: 114
Liked 10 Times on 7 Posts
Likes Given: 3

Default

Nicely done. Your OP was a big influence in my decision to go the SSVR route - the more I thought about how I want my system to work, the more I realized I didn't really need a PID. My hope is to insulate my keggle well enough that it holds mash temperature without needing to fire the element between dough-in and bag-out. If it doesn't, having a knob to control element output should come in handy.

After trolling round eBay for an hour yesterday looking for a suitable enclosure for my controller, I went to Lowe's and picked up a 6x6x4 Cantex box just like yours. Looks like it will work well.

__________________
pogden is offline
 
Reply With Quote Quick reply to this message
Old 06-25-2013, 11:29 AM   #20
cliffhanger1821
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Norfolk, VA
Posts: 146
Liked 6 Times on 5 Posts
Likes Given: 9

Default

Glad I could help. I really like it so far, the simple yet functional, no frills approach is what I was going for. I am pleased.

__________________
cliffhanger1821 is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Starting my simple-EBIAB build featuring brewtroller 4.0 HBC Electric Brewing 2 11-21-2013 01:27 AM
odi3's simple 30a eBIAB build ODI3 Electric Brewing 6 10-12-2012 02:30 PM
My first post and simple eBIAB homebrew journey Disintegr8or DIY Projects 35 02-11-2012 01:51 PM
Planned simple 1 element build mrbippers Electric Brewing 15 12-01-2011 12:25 AM
eBIAB using Ranco controller el gato Electric Brewing 11 11-19-2011 03:11 AM