Kegconnection Complete Starter Kit and More Giveaway!


Home Brew Forums > Home Brewing Beer > Electric Brewing > Kettle wiring hookup problem

Reply
 
LinkBack Thread Tools
Old 01-08-2013, 08:13 PM   #1
milesvdustin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Pensacola, Florida
Posts: 631
Liked 11 Times on 11 Posts
Likes Given: 23

Default

So I finally get to installing my power cord on my kettle, just like Kal's method. Well I ordered the same cord grips from mcmaster but they don't fit the boxes I got from lowes. But, even if the grips did fit, my power cord is too fat to fit through the cord grip. What should I do? I bought my cords from eBay, the ones with 9' of 10/3 with the locking plug attached that were talked about a while ago. I'm at a loss here so I walked away from it before I smashed it.


Help!!!

I guess I could buy a 3/4 npt tap and drill bit.... That would fix my box, but would I be able to drill out the grip at all?

Edit: I just realized that if I drill out my boxes there won't be any material left for the tap to make threads. Looks like I have to buy and build all new boxes.... FML

__________________
Quote:
Originally Posted by djsethall View Post
It's like a big hot douche for my brewery.
milesvdustin is offline
 
Reply With Quote Quick reply to this message
Old 01-08-2013, 08:26 PM   #2
iijakii
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2010
Location: Texas
Posts: 1,504
Liked 52 Times on 44 Posts
Likes Given: 150

Default

I seem to recall ordering the wrong cord-grip and having to upsize later. I just bought the larger one and used my step-bit to rectify the panel-hole.

__________________
iijakii is offline
 
Reply With Quote Quick reply to this message
Old 01-08-2013, 08:33 PM   #3
milesvdustin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Pensacola, Florida
Posts: 631
Liked 11 Times on 11 Posts
Likes Given: 23

Default

I know I ordered the right size, I just double checked. I checked the packaging as well. Anyone have a 3/4 npt tap and a 29/32 drill to lend? Those are pricey!

__________________
Quote:
Originally Posted by djsethall View Post
It's like a big hot douche for my brewery.
milesvdustin is offline
 
Reply With Quote Quick reply to this message
Old 01-09-2013, 02:30 PM   #4
mwnovak
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2012
Posts: 4
Default

Hi there. "Wrong" doesn't mean that you didn't order the part Kal spec'd . . . it just means that the cord grip you have doesn't fit or won't work with your specific application.

Easiest solution would be ordering a new cord grip from McMaster-Carr: what size NPT ports do you have on your box from Lowes? what's the outside diameter of your cord?

With that info in hand, you should be able to find one that works: http://www.mcmaster.com/#standard-cord-grips/=kylubj

If you're not wed to having an aluminum grip, take a look at the "Nylon Liquid-Tight Cord Grip" models: same or better certs, nearly as good temp rating, water-tight, and half the cost.

--Matt

__________________
mwnovak is offline
 
Reply With Quote Quick reply to this message
Old 01-10-2013, 04:47 PM   #5
milesvdustin
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2010
Location: Pensacola, Florida
Posts: 631
Liked 11 Times on 11 Posts
Likes Given: 23

Default

Problem is my cables are too fat to fit the grip. Now if I strip the outer insulation and then electrical tape the wires they will fit just fine, so the cord grips I have will work just fine. The other problem were the boxes I purchased were 1/2" npt fittings, not 3/4" like the grips I ordered. I bought two new boxes and two new plates from lowes last night in the correct size and drilled new holes and jb welded them up. So I solved my problem and only had to spend about 20 bucks extra. Live and learn.

__________________
Quote:
Originally Posted by djsethall View Post
It's like a big hot douche for my brewery.
milesvdustin is offline
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
3ph Steam Kettle Wiring Question onthekeg Electric Brewing 17 08-30-2012 03:43 AM
kettle wiring Scweco Electric Brewing 3 08-17-2012 04:09 PM
wiring a 240V heater to a Kettle CanadianNorth Electric Brewing 9 03-31-2011 11:01 PM
Wiring Problem mcaustin DIY Projects 4 06-06-2008 08:17 PM
Kenmore wiring problem jager DIY Projects 7 03-20-2007 06:16 PM